Lime facade paint 16 L
The tradition of burning lime in Podpeč
Limestone making is a very old activity that produces lime for masonry and bleaching. The limestone fired in the old way is a centuries-old tradition of Podpeč limestones. Folk tradition says that the place Podpeč got its name from this old activity.
This demanding task goes back a long way, and in Podpeč they started this activity in ancient Roman times, around the year zero, when they needed a binding material (mortar) for the construction of ancient Emona (today's Ljubljana) for the construction of buildings. the ingredient is lime. Both lime and the world-famous Podpeč marble were loaded by boats from Podpeč to Emona (later Ljubljana) along the Ljubljanica. More modern records of limestone mining in Podpeč can be found in articles dating back to 1890. From the records it can be concluded that more powerful and advanced masonry limestones in Podpeč appeared at the same time as the construction of the nearby Southern Railway, in 1857, when construction also brought to Podpeč more advanced engineering knowledge and the capital that the existing, or. immigrant villagers earned during construction. Prior to that, limestone workers set up the so-called simpler limestones in "baskets", which were placed in the forests above Podpeč in the immediate vicinity of firewood and already naturally broken stones from the sloping meadows. Foundations or the rings of these simple basket limestones woven from wicker are still visible today. The authenticity of the limestones is also indicated by the over 300-year-old, hand-excavated limestones near nearby churches and houses.
Most of the Ljubljana buildings built after the great Easter Ljubljana earthquake, which occurred on April 14, 1895, were built from Podpeč lime. Among the most important buildings built with the help of Podpeč lime are the National and University Library (NUK), Skyscraper, and most of the buildings along Slovenska cesta. It is evident from the records that the Podpeč lime, in addition to the Podpeč marble, was especially appreciated by the master, architect Jože Plečnik.
The activity has become a tradition that has survived to this day. At that time, people bought lime and transported it by wooden carts pulled by horses. At home, they had pits (limestones) where they burned fire lime and thus obtained slaked lime. It was used for masonry and bleaching. Over the years, industrial hydrated lime has appeared on the market. It was easier to use because there was no need to turn it off. Today, however, we offer mainly slaked lime, which is indispensable in the restoration of older monument-protected buildings and finished whitening products. We also offer a lime product called lime paint, which is a quality natural mineral paint.
Lime facade paint
It is a natural mineral paint based on aged slaked lime. It is high quality, well-adhered and durable. It is suitable for painting facades on new and old buildings. We also recommend its use on older stone buildings, such as churches and similar monument-protected buildings.
It can be applied with a roller brush or spray
Tinting: with dry oxide or liquid acrylic paints
Packing: in buckets of 16 l
The old process of extracting lime - a recognized home craft
The process of obtaining lime is demanding, as it requires a lot of physical effort and knowledge. Limestone (Ca CO3 calcium carbonate), which was previously dug in domestic quarries and is light gray in color, should be stacked in a special kiln called limestone. First of all, it is necessary to make a vault (velb) from the stones, under which a firebox is formed. The vault must be carefully folded, as there is a risk that the vault will collapse during burning and consequently it will not be possible to continue burning. Thus, each stone must be processed by hand to adapt to each other. Once the vault is made, the stone is filled to the top of the limestone. When the limestone is filled, the firebox is closed with an iron door and the furnace is ignited. It must burn night and day for 5-6 days at a temperature of 900 - 1,200 degrees Celsius, releasing carbon dioxide and forming calcium oxide (CaO) - calcareous lime. When the limestone is fired enough is determined by the color of the fire, which is seen at the top of the limestone.
When the stone is sufficiently fired, the limestone must be cooled for at least two days. Then the iron door of the kiln is removed, the firebox is cleaned of ash residues and the excavation of calcined lime is already started, which is taken to limestones pre-filled with water so that the calcined lime can be extinguished.
Thus, the addition of water produces calcium hydroxide Ca (OH) 2 - slaked lime. Here the slaked lime remains long enough to reach a suitable age for use.
The time required for the stone preparation process, limestone filling, wood burning and final quenching is one month of hard work. This is an ancient way of extracting slaked lime and the activity is a recognized home craft.
Pogoare questions
- We have the walls whitewashed with jupol. Can we apply lime paint to Jupol?
- How long do you recommend drying after the first application, or. when should i whiten a second time?
- I have a new building. Which order or. which of your products do you recommend for the first application and how many times is it good to apply whitewash?
- I wonder if the slaked lime to whiten the walls in the house is wiped off and leaves white stains on the dress?
- Is it necessary to dilute the lime paint with water before use and in what proportion?
- The attic apartment was renovated and gypsum boards (knauf) were used for the ceiling surfaces and partitions. Can lime paint be applied directly to gypsum boards or is it necessary to pre-plaster the walls?
It is recommended to remove Jupol, but lime paint can also be applied to Jupol (two coats). While the surface is painted with jupol smooth, the surface of the lime paint is slightly rough, which is also fine.
Otherwise it depends on the weather, or. from temperature and humidity, as this affects the drying time, but we recommend that it dries at least one day, which means it is good to carry out a second application the next day.
For new construction, for the first application we recommend slaked lime, which is applied with a brush or. spraying, followed by a second and third application with lime paint, which can be applied with a roller. Consumption of slaked lime is 1kg / 6 m2 of surface. Also 1 l of lime paint / 6 m2 of surface.
Calcium hydroxide-slaked lime reacts with carbon dioxide from the air, which means that the lime hardens-petrifies and is not erased. However, experience has also shown that at very high air temperatures, ie in the summer heat, whitewash dries so quickly and because there is no moisture in the air, it can happen that invisible dust is formed on the surface of the wall, which is erased. These are rare exceptions, but they are worth remembering.
Lime paint must be diluted with water up to 15% before use, depending on the wall. A wall that absorbs strongly needs to be diluted more so that the whitewash looks even and looks more beautiful.
Lime paint can be applied directly to gypsum boards because it adheres well. As in all cases, the walls are only pre-bandaged.
No reviews found