4” multistage deep well sand resistant pump 94 l/min 135 m 1500 W 230 V

4 SD 3/18___I/230V/000672
46000 
In stock
The text has been machine translated.

Delivery
Payments
Advantages
  • — Product warranty
  • — Possible return of products
  • — Different payment methods
  • — Wide selection of products
Immersion depth (max.)135 m Flow5640 l/h = 94 l/min DiameterØ 98 mm

Description of 4” multistage deep well sand resistant pump 94 l/min 135 m 1500 W 230 V

98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells.

All SD pumps have PZH (National Institute of Hygiene) approval. Increased resistance to sand is achieved by using "floating impellers" and the selection of wearresistant materials: brass inlet and outlet, AISI 304 stainless steel housing, shaft and filter screen, and the impellers made of high quality plastic materials. Pumps with 230 V ~ / 50 Hz motors are equipped with a control box with built-in capacitor and overcurrent protection. Pumps are available with 20 m long power cable.

The 4SD series were the first pumps on the market to be known as "sand resistant”. Currently, they are among the few on the market to provide such high sand resistance. Maximum sand content in water is up to 5%.

Application

Supply of water to single-family houses and farms from deep well intakes. Irrigating gardens and orchards. Land drainage/dewatering. Water supply systems. Industrial applications.

Operating conditions

• Maximum liquid temperature 35°C
• Maximum ambient temperature 35°C
• Class B/F Insulation
• Operating mode - continuous
• Protection - IP68

Materials

• Inlet/outlet: brass
• Housing: stainless steel AISI 304
• Shaft and rotor: stainless steel AISI 304
• Impeller: Noryl
• Venturi tube: steel Noryl
• Mechanical seal: Ceramics/Sic/NBR
• Motor: oil cooling
• Rotational speed of the electric motor: 2850RMP

Voltage
Electric motor (230 V / 50 Hz single-phase alternating voltage AC)
Power
1500 W
Weight
11,06 kg
Warranty
12 mesecev
Amperage
3 A
Rotational speed of the electric motor
2800 rpm
Fluid flow rate (maximum pumping speed)
65 liters per minute
Immersion depth (max.)
135 m
Flow
5640 l/h = 94 l/min
Pressure
13,5 bar
Diameter
Ø 98 mm
Fluid rise (height difference)
26 m
Water temperature (max.)
35 °C
Maximum ambient temperature
35 °C
Pump dimensions
(Ø 98 x 1260) mm
Diameter of the outlet pressure pipe connection on the electric pipe submersible pump
Nominal diameter Ø 36.1 mm (6/4 inch - 6/4" - 1 1/2 inch) according to standard DIN 2440:1978-06;
Connection
Ø 36.1 mm (6/4 inch - 6/4" - 1 1/2 inch)
Diameter of the outer casing of the electric submersible pump
Ø 95 mm
The diameter of the outer casing of the electric submersible pump in inches
4"
Bore diameter required to insert electric submersible pump
Ø 100 mm
Recommended bore diameter for inserting deep well pump
Ø 125 mm
Housing type
Stainless steel AISI 304
Shaft and rotor
Stainless steel AISI 304
Impeller
Noryl
Venturi tube
Noryl
Mechanical seal
Ceramics/Sic/NBR
Motor
Oil cooling
Protection class
IP68
Class
B/F Insulation
Operating mode
Continuously
Pumping
From deep wells, wells and cisterns and free-standing reservoirs
Lubrication
Is not necessary
Outer casing made of stainless steel submersible part of electric submersible pipe pump
Yes
Quick and easy installation of a submersible drainage sump pump
Yes
Airtight seal of the electric motor of the submersible drainage sump pump
Yes
Additional connection with external thread for screwing to the submersible pump on one side and ribbed relief for a firmer connection to the pressure or suction pipe with a clamp on the other side of the connection
Yes
Two steel lugs for easy connection of steel rope or chain for easy raising and lowering of the submersible pump from and into the well
Yes
Suitability of a submersible drainage sump pump for operation in hydrophore systems
Yes
Find similar

No reviews found

Fast and contactless delivery

We deliver throughout the EU

Return within 14 days

You can return the product within 14 days of purchase