Hand pump for pressure test 40 bar with 10 L tank [CLONE]
Description of a hand pump for pressure test 40 bar with 10 L tank
With a manual pump for a pressure test of 40 bar, a container can be used to fill various pipelines with liquid at the required pressure (pressure). Later, through the built-in pressure gauge or. pressure (manometer) is monitored or the pipeline is tight. It is mainly used for solar installations, floor heating systems, heating pipe distribution, etc.
In addition to the hand pump, the set also includes a 115 cm pressure hose, a suction hose, a removable cleaning filter on the suction hose and a 10-liter container from which we pump liquid into the pipeline. The filling liquid container has a lid on it, which prevents accidental spillage of the filling liquid. The lid has a built-in opening for filling liquid. The pump can also be used on its own without a container. The connection diameter of the connecting pressure pipe is Ø 12.7 mm (1/2 inch - 1/2 "- 1/2 inch) with an external thread. By unscrewing and replacing the coupling, you can also install a pressure pipe of a different diameter. You can also easily replace the suction pipe with a longer tube The flow rate of the liquid per push of the pump lever (lever stroke) is 13 ml.
Excess liquid or air can be drained through the vent screw (air outlet) or water outlet in the event of excessive pressure in the filling unit.
The hand pressure pump with tank has two strong metal, folding handles built into each side of the tank for easier transfer. At the bottom of the container, however, are four strong legs for a reliable and firm placement of the hand pump for the pressure test with the container on the base.
Testiranje s tlačno črpalko
No se encontraron opiniones