5” multistage deep well sand resistant pump 500 l/min 115 m 5500 W 400 V

CODE	Immersion depth (max.)	Flow	Availability	Price
5 SD 20/8___I/400V/OPA000779	99 m	30000 l/h = 500 l/min	On backorder	1.010⁰⁰ ^€	+ −
5 SD 20/11___I/400V/001885	115 m	30000 l/h = 500 l/min	On backorder	1.090⁰⁰ ^€	+ −
5 SD 20/14/400V___I/001886	155 m	30000 l/h = 500 l/min	On backorder	1.240⁰⁰ ^€	+ −
5 SD 20/17___I/400V/001887	185 m	30000 l/h = 500 l/min	On backorder	1.380⁰⁰ ^€	+ −

Description of 5” multistage deep well sand resistant pump 500 l/min 115 m 5500 W 400 V

127 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 5” wells. The SD series were the first pumps on the market to be known as "sand resistant”. The "sand resistance" is the unquestionable advantage of SD pumps over competing products due their innovative and rare design with increased resistance to sand, unusual in 3-inch pumps. For 5SD 25 pumps, the maximum sand content in water is 5%. Increased resistance to sand is achieved by using "floating impellers".

Application

Supply of water to large farms from deep water intakes, garden and orchard irrigation, shrubs and tree nurseries, land drainage/dewatering. Water supply systems, industrial applications

Operating conditions

• Maximum liquid temperature 35°C
• Maximum ambient temperature 35°C
• Class B Insulation
• Operating mode - continuous
• Protection - IP68

Materials

• Inlet/outlet: grey cast iron
• Housing: stainless steel AISI 304
• Shaft and rotor: stainless steel AISI 304
• Impeller: Noryl
• Venturi tube: Nory
• Mechanical seal: Ceramics/Sic/NBR
• Motor: oil cooling
• Rotational speed of the electric motor: 2850RMP

Voltage

Electric motor (400 V~3 / 50 Hz three-phase alternating voltage AC)

Power

5500 W

Weight

42 kg

Warranty

12 months

Rotational speed of the electric motor

2850 rpm

Fluid flow rate (maximum pumping speed)

500 liters per minute

Immersion depth (max.)

115 m

Flow

30000 l/h = 500 l/min

Pressure

11,5 bar

Diameter

Ø 127 mm

Pump type

Cascade, sand resistant, floating impellers

Water temperature (max.)

35 °C

Maximum ambient temperature

35 °C

Pump dimensions

(Ø 127 x 1640) mm

Diameter of the outlet pressure pipe connection on the electric pipe submersible pump

Nominal diameter Ø 80 mm (3 inches - 3" - 3 inches) according to standard DIN 2440:1978-06;

Connection

Ø 80 mm (3 inches - 3" - 3 inches)

Diameter of the outer casing of the electric submersible pump

Ø 127 mm

The diameter of the outer casing of the electric submersible pump in inches

5"

Recommended bore diameter for inserting deep well pump

Ø 160 mm

Housing type

Stainless steel AISI 304

Shaft and rotor

Stainless steel AISI 304

The substance of which the discharge connection is composed, and the inner chamber

Gray cast iron

Impeller

Noryl

Venturi tube

Noryl

Mechanical seal

Ceramics/Sic/NBR

Motor

Oil cooling

Protection class

IP68

Class

Class B

Operating mode

Continuously

Lubrication

Is not necessary

Outer casing made of stainless steel submersible part of electric submersible pipe pump

Yes

Quick and easy installation of a submersible drainage sump pump

Yes

Airtight seal of the electric motor of the submersible drainage sump pump

Yes

Two steel lugs for easy connection of steel rope or chain for easy raising and lowering of the submersible pump from and into the well

Yes

Suitability of a submersible drainage sump pump for operation in hydrophore systems

Yes

Find similar

Primer prikaza montaže črpalke

Prikaz delovanja potopne cevne črpalke

No reviews found