Automatic fuel tap 75 L / min with digital meter

- automatic fuel flow shut-off valve when the tank is full "

- External thread for connecting the filling pipe, diameter 25 mm (1 inch)

- Measurement of milliliters, centiliters, decilitres and up to 99999 liters

- Possibility of calibration of the meter for liquids of different densities

- Possibility to reset the main and common counter

- Seven-digit and five-digit digital display

- Measurement of the amount and speed of fluid flow

- Measurement of a single fluid flow

- Measurement of total volume flow

- Maximum possible flow 75 L / min

Automatic fuel tap 75 L / min with digital meter

Diesel fuel (gas oil - oil), heating oil, petrol and kerosene can be filled with an automatic refueling gun with a digital counter. The automatic fuel tap with analogue meter has a built-in automatic (automatic) shut-off valve of the fuel flow, which interrupts the flow when the full tank (tank) is reached.

The maximum possible flow of the automatic refueling lever with analogue meter is 75 L / min. The pouring speed can be easily adjusted by pressing the handle with one hand. It is also possible to adjust the tapping via a three-stage pin located on the handle. The pin can be set to the desired value with one hand by pressing the handle of the refueling gun, and the filling tap will maintain a steady flow of fuel. Also, the preset automatic tapping power can be interrupted by a simple one-handed grip of the handle.

The automatic tap for refueling with a meter has a handle, and most of the housing is ribbed (profiled), which consequently allows a firm grip, and comfortable and safer work. It is also easier to clean. Most of the housing of the automatic dispenser handle is built of robust cast steel. The 18 cm tap tube consists of a high quality and solid, stainless aluminum alloy. On the lower, outer and upper side of the handle, there is an adapted groove for easy placement of the handle on the adapted holder.

The automatic dispensing gun with digital flow meter has an incised internal nominal thread diameter of Ø 25 mm (1 inch - 1 "- 1 inch). The actual external diameter of the internal thread including any wall thicknesses of the connected metal pipe is Ø 33.7 mm. for refueling 75 L / min with digital fuel flow meter can be connected additionally added, made of high-quality strong aluminum alloy, built-in connection with built-in fine, easy-to-wash filter and rubber seal with external thread for screwing on the tap on one side and ribbed relief for a firmer connection to the pressure or suction pipe with a clamp on the other side of the aluminum alloy connection. Larger, external thread on the connection is Ø 25 mm in diameter (1 inch - 1 "- 1 inch), the actual external diameter of the larger external thread with included thread wall thicknesses is Ø 33.7 mm. The smaller additional connection with external ribbed relief has a diameter of Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch), the actual outer diameter of the smaller connection with ribbed relief with included metal thread wall thicknesses is Ø 26.9 mm.

Fuel tap 75 L / min, has a high-precision turbine digital meter for measuring fuel flow. The accuracy of measuring the fuel flow on the meter is ± 0.2%. The turbine meter has magnetic sensors built into the turbine blades, due to which the flow measurement takes place without contact and without causing friction. This method of flow measurement contributes to the high accuracy of the 0.2% meter and its long service life.

The maximum pressure (pressure) of the liquid in the fuel tap with a digital meter is 0.25 MPa (2.5 bar).

The automatic refueling gun with digital meter has a low resistance which causes the least loss of flow power during refueling.

The flow of diesel fuel (gas oil - oil), heating oil, petrol and kerosene can be measured with a digital turbine meter. The digital flow meter is intended for use in the petroleum, chemical, medical, transportation and food industries.

The enabled flow of the digital turbine meter is from 20 L / min to 75 L / min with a pressure of 0.25 MPa (2.5 bar). The digital meter measures the amount and speed of fluid flow.

The digital flow meter has a five-digit high-precision sensitive adjustable digital display (from 0.000 to 9999.9) for measuring the single flow of diesel fuel, for measuring the amount of diesel flow in liters, decilitres, centiliters and milliliters. The digital display of the meter can be turned as desired by unscrewing the four screws. When measuring a single fuel flow of up to 99 liters, the digital meter measures up to a milliliter accurately, up to 999 liters up to a centiliter accurately and up to 9999 liters up to a deciliter.

The one-time diesel flow meter can be reset. In addition to the main tThe single-flow urban meter also includes a seven-digit high-precision, sensitive and adjustable digital meter (from 0 to 999999.9) for measuring the total flow of diesel fuel in liters, with an additional decimal for measuring the flow of diesel fuel in deciliters. The total diesel flow meter also has the option of resetting the single diesel flow meter. The reset is performed automatically, when the total flow value reaches 9999.9. The accuracy of fuel flow measurement on both meters is ± 0.2%.

The digital flow meter can be purposefully calibrated manually when dispensing different liquids with different composition. Kerosene thus has a different composition than diesel fuel, so higher deviations in flow measurement may occur. In this case, the kerosene is poured into a measuring container with accurately imprinted measuring markings. If the amount of kerosene refilled on the fuel gauge is 100 liters, but in fact 103 liters of kerosene are filled in the tank according to the measuring markings, then the digital turbine fuel flow meter can be calibrated at the push of a button to at the next flow showed a more precise quantity.

On the digital flow meter, you can set different units for measuring the flow meter. We can set the flow measurement in Liters, Gallons, Pints and Quarts.