Price
0.0
On backorder
1128  1281  -12%
+
Round construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally, the...
0.0
On backorder
1152  1245  -7%
+
Rectangular construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally,...
0.0
On backorder
1152  1500  -23%
+
The cutter is used to make holes in polystyrene for polystyrene plugs. The cutter is made of durable and durable plastic. The cutter can be mounted on devices equipped with a three-jaw chuck, such as screwdrivers or drills. Features: Polish product Blade replacement possible The...
0.0
On backorder
1175  1538  -24%
+
The self-adhesive bathtub tape is used to seal the connections between the bathtub, washbasin, shower tray, etc. and the wall. The tape allows you to seal and mask the joints, even on uneven surfaces. Features: Width 36 mm Length 3.1 m
0.0
On backorder
1199  1683  -29%
+
A flat file with a tungsten carbide coating is intended for the rough machining of ceramics, terracotta and glaze. The thick coating makes the file suitable for initial edge grinding or edge preparation for further work. The file has a comfortable plastic handle. Features: Tungsten...
0.0
On backorder
1222  1683  -27%
+
The DED011 clamp is a tool that allows you to break and adjust the glazing tile to the desired size and shape. Thanks to the use of tungsten carbide blades, we can handle even hard plates with pliers. For the convenience and comfort of work, the handles have been specially profiled and covered...
0.0
On backorder
1246  1464  -15%
+
A stripper that will find its application when insulating and lining surfaces with polystyrene boards. With its use, we will matt the polystyrene before sticking it and reach it by leveling its surfaces before stretching the mesh with glue. The stripper is made of strong and durable plastic, and...
0.0
On backorder
1246  1318  -5%
+
Rectangular construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally,...
0.0
On backorder
1300  1940  -33%
+
Spare cutter wheel DED0023 fits tiling machines 1151, 1152, 1153, 1154. Wheel made of tungsten carbide. The applied bearing improves precision and comfort during cutting. Cutting wheel diameter 22 mm. Features: Bearing Tungsten carbide Technical data: Cutting wheel diameter:...
0.0
On backorder
1340  1538  -13%
+
Round construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally, the...
0.0
On backorder
1410  1904  -26%
+
Sheet metal shears are designed for cutting straight sheet metal or profiles for plasterboard. The maximum sheet thickness is 1.2 mm. The blades of the scissors are made of CrV steel. The handle has been profiled for better comfort during work. Features: CRV steel blades Straight cut...
0.0
On backorder
1410  1904  -26%
+
Sheet metal shears are designed for cutting left sheet metal or profiles for plasterboard. The maximum sheet thickness is 1.2 mm. The blades of the scissors are made of CrV steel. The handle has been profiled for better comfort during work. Features: CRV steel blades Left cut Maximum...
0.0
On backorder
1410  1904  -26%
+
0.0
On backorder
1410  1940  -27%
+
Spare cutter wheel DED0024 fits tiling machines 1163-080, 1163-100. The wheel is made of tungsten carbide. The applied bearing improves precision and comfort while cutting. Cutting wheel diameter 22 mm. Features: Bearing Tungsten carbide Technical data: Cutting wheel diameter:...
A smooth float made of stainless steel will find its application during renovation or construction. It is intended for application and spreading on large surfaces of materials such as; gypsum finishing coat, finishing coat, glues or plasters. The float is made of stainless steel, which ensures...
0.0
On backorder
1481  1683  -12%
+
The DED02QL1 tile leveling kit is a set consisting of 50 discs and 50 clips. The set is used for leveling wall and floor tiles of various formats. Thanks to the use of the system, we will take care of both precision and save time when laying tiles. The system will be used both by professional...
0.0
On backorder
1481  1683  -12%
+
Supplementary set for the DED02QL2 set containing 100 pieces of wedges
0.0
On backorder
1622  2013  -19%
+
A set for shaping the right shape with a silicone joint. The set includes 5 overlays for shaping, made of a flexible, deformation-resistant material. The body of the tool itself, without applying the appropriate tip, can be used to remove old silicones. The tool is made of a durable polymer that...
0.0
On backorder
1622  1720  -6%
+
Rectangular construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally,...
0.0
On backorder
1645  2305  -29%
+
TWIST armor strapping machine is used for twisting the binding wire during reinforcement works. Wire terminated with eyelets should be used for the strapping machine. The strapping machine significantly speeds up the work and saves time. One pull on the knotter twists the wire three times. The...
0.0
On backorder
1739  2270  -23%
+
The self-adhesive bathtub tape is used to seal the connections between the bathtub, washbasin, shower tray, etc. and the wall. The tape allows you to seal and mask the joints, even on uneven surfaces. Features: Width 62 mm Length 3 m
A smooth float made of stainless steel will find its application during renovation or construction. It is intended for application and spreading on large surfaces of materials such as; gypsum finishing coat, finishing coat, glues or plasters. The float is made of stainless steel, which ensures...
0.0
On backorder
1763  1978  -11%
+
Round construction bucket for mixing mortars, adhesives or plasters. The bucket is made of plastic, characterized by high resistance to cracks and easy cleaning. Inside the caste there is a scale that facilitates the proper selection of the proportions of the mixed materials. Additionally, the...
0.0
On backorder
1810  2563  -29%
+
Circular cutters DED023 is a tool that allows you to cut ceramics and glass. Thanks to the use of two precisely matched tungsten carbide cutting wheels, the obtained cutting line is very precise. Additionally, the wheels are covered with titanium nitride, which increases the service life of the...
0.0
On backorder
1904  2671  -29%
+
Reinforcement tongs are used to cut, shorten the binding wire or to twist it during reinforcement works. The clamps are made of carbon steel and secured with a chrome layer. Length 300 mm. Features: Carbon steel, chrome plated Maximum hard wire thickness -2.5 mm Maximum thickness of...
0.0
On backorder
2021  2563  -21%
+
Bar shears are used for cutting rebars, bolts, wires or chains. Jaws made of CrMo steel (chrome-molybdenum). The handle is shaped and covered with non-slip rubber. Length 350 mm. Maximum wire diameter 7 mm. Features: CrMo steel bar shear jaws Contoured handle covered with non-slip...
0.0
On backorder
2444  3075  -21%
+
Bar shears are used for cutting rebars, bolts, wires or chains. Jaws made of CrMo steel (chrome-molybdenum). The handle is shaped and covered with non-slip rubber. Length 450 mm. Maximum wire diameter 8 mm. Features: CrMo steel bar shear jaws Contoured handle covered with non-slip...
0.0
On backorder
2679  3696  -28%
+
The Economical tiling bath with a capacity of 24 L is perfect for grouting tiles. Made of durable plastic, it is light and stable. It has 2 notched rollers included in the set for removing excess water from the trowel. The bathtub has a profiled bottom and a graduation inside. Solid and...
0.0
On backorder
2891  3808  -24%
+
Contour copy is a tool for mapping irregular shapes or adjusting cuts. With its help, you can easily transfer the shape to cut it later in a tile, floor panel, board or metal. The template will find its application in the renovation and construction industry, modeling or carpentry work....
0.0
On backorder
3267  3734  -13%
+
The manual glaze cutting machine model 1139 is designed for cutting and trimming tiles or terracotta tiles. With its help, we can make a longitudinal or longitudinal cut or a diagonal cut. The movement of the cutting wheel takes place on the guides by means of sliding sleeves. The solid metal...
0.0
On backorder
3784  4649  -19%
+
Bar shears are used for cutting rebars, bolts, wires or chains. Jaws made of CrMo steel (chrome-molybdenum). The handle is shaped and covered with non-slip rubber. Length 600 mm. Maximum wire diameter 10 mm. Features: CrMo steel bar shear jaws Contoured handle covered with non-slip...
0.0
In stock
4000  4026  -1%
+
Galvanized eyelet binding wire is used to bind reinforcements, fencing mesh, etc. The wire has ready-made meshes at its ends, which significantly shortens the working time. Thanks to the zinc layer, it is resistant to corrosion. Diameter 1 mm. Length 12.7 cm. Quantity 2500 pcs Features:...
0.0
On backorder
4653  6186  -25%
+
Bar shears are used for cutting rebars, bolts, wires or chains. Jaws made of CrMo steel (chrome-molybdenum). The handle is shaped and covered with non-slip rubber. Length 750 mm. Maximum wire diameter 13 mm. Features: CrMo steel bar shear jaws Contoured handle covered with non-slip...
0.0
On backorder
4700  5015  -6%
+
The DED053 cutter is used to make holes in such materials as tiles, terracotta, brick, plastic. The cutter is equipped with 3 blades made of sintered carbide, characterized by high hardness and resistance to abrasion. The tool can be mounted on devices equipped with a three-jaw chuck, such as...
0.0
On backorder
5335  6258  -15%
+
The Profi-Clean tiling bath with a capacity of 24 L is perfect for grouting tiles. Made of durable plastic, it is light and stable. It has 2 rollers in the set for removing excess water from the trowel. The bathtub has a profiled bottom and a graduation inside. Solid and contoured handle....
0.0
On backorder
5546  7064  -21%
+
Bar shears are used for cutting rebars, bolts, wires or chains. Jaws made of CrMo steel (chrome-molybdenum). The handle is shaped and covered with non-slip rubber. Length 900 mm. Maximum wire diameter 15 mm. Features: CrMo steel bar shear jaws Contoured handle covered with non-slip...
0.0
On backorder
6000 
+
The bar bender is used to bend and shape rebar. The product is indispensable during reinforcement works. The bender is designed for bars from 6 to 8 mm in diameter. Features: Mounting holes in the base Bar bender from 6-8mm in diameter
0.0
On backorder
6792  9150  -26%
+
The manual glaze cutting machine model 1130 is a 3-function tool. It is intended for the processing of glazed tiles or terracotta. With its help, we can make a longitudinal cut, a diagonal cut or a hole. The movement of the cutting wheel takes place on the guides by means of sliding sleeves. The...
0.0
On backorder
7755  10358  -25%
+
The manual glaze cutting machine model 1131 is a 3-function tool. It is intended for the processing of glazed tiles or terracotta. With its help, we can make a longitudinal cut, a diagonal cut or a hole. The movement of the cutting wheel takes place on the guides by means of sliding sleeves. The...
0.0
On backorder
8108  12444  -35%
+
The Profi-Clean tiling bath with a capacity of 24 L is perfect for grouting tiles. Made of durable plastic, it is light and stable. It has 2 rollers in the set for removing excess water from the trowel. The bathtub has a profiled bottom and a graduation inside. Solid and contoured handle. The...
0.0
On backorder
8272  10798  -23%
+
The manual glaze cutting machine model 1150 is designed for cutting and trimming tiles or terracotta tiles. With its help, we can make a longitudinal or longitudinal cut or a diagonal cut. The movement of the cutting wheel is carried out on the guides by means of bearings. The solid metal...
0.0
On backorder
8484  11420  -26%
+
The manual glaze cutting machine model 1132 is a 3-function tool. It is intended for cutting and trimming tiles or terracotta tiles. With its help, we can make a longitudinal cut, a diagonal cut or a hole. The movement of the cutting wheel takes place on the guides by means of sliding sleeves....
0.0
On backorder
8484  9590  -12%
+
The DEDRA 1238P panel cutter is a device useful for all those who want to change the interior of their home on their own by laying floor panels. Thanks to the maximum cutting length of 210 mm, it allows cutting most panels available on the market with typical widths of 130, 150, 160 and 190 mm....
0.0
In stock
13000 
+
The bar bender is used to bend and shape rebar. The product is indispensable during reinforcement works. In order to reduce the resistance during operation, a solid bearing was used. The bender is designed for 12 mm bars. Features: Mounting holes in the base Bearing for reduced...
Show another 13 products