Electric pressure test pump 60 bar with tank

- For testing and filling underfloor heating pipes, radiator heating pipes, solar system ....

- Filling and test pressure 60 bar

- Pumping water and aqueous solution with antifreeze additive

- Container with lid for filling liquid

- Flow rate of liquid 2.7 liters per minute

- Two screw valves for venting or draining excess liquid

- Manometer

Electric pressure test pump 60 bar with tank

With an electric pump for a pressure test of 60 bar with a container, various pipelines up to a pressure of 60 bar can be filled with liquid at the required pressure (pressure). Later, through the built-in pressure gauge or. pressure (manometer) is monitored or the pipeline is tight. A quality oil pressure / pressure gauge (manometer) can measure pressure from 0 MPa / psi to 16 MPa / 2200 psi. The pressure test pump is mainly used for solar installations, underfloor heating systems, heating pipe routings, etc. for maintenance purposes. With a pressure test pump of 60 bar with a container, water and aqueous solution can be pumped with an antifreeze additive.

In addition to the pressure test pump, the kit also includes a pressure hose, a suction hose, a removable cleaning filter on the suction hose and a container from which the liquid is pumped into the pipeline. The pressure pump can also be used on its own without a tank. The leak test pump of the electric pressure pump comes with a lid. An electric pressure test pump can be easily carried in the container, or liquids can be pumped out of it, and a pressure pump can be placed on the lid above the container.

You can also install a pressure hose of a different diameter by unscrewing and replacing the coupling. We can also easily replace the suction hose with a longer hose.

The flow rate of the liquid is 2.7 liters per minute.

Excess liquid or air can be safely and precisely discharged via two screw valves for venting (air outlet) or water outlet in the event of excessive pressure in the filling unit. The screws can be used to completely close the piping system for long-term accurate measurement of the stability of the pressure in the piping.

The electric pressure pump has a built-in handle for easy carrying at the top for easy carrying, and there are four rubber feet on the base for reliable and firm placement of the pressure test pump on the ground, which significantly reduces vibrations during operation.