Concrete grinder - ŽIRAFA 1010 W - Sanders for walls and concrete

General description of a diamond wall grinder

With the giraffe wall sander, it is possible to smooth walls and ceilings up to four times faster before whitewashing than with manual sanding. After sanding, the wall or ceiling will be completely smoothed, which will not leave scratches, holes, scratches, lumps and other unevenness or irregularities later after bleaching. The walls and ceilings will be perfectly flat. It is also possible to remove old coatings of wall paint with a wall sander. With a diamond grinder you can also level hard lime plasters, concrete walls, remove graffiti, old coatings. You can level screeds and concrete slabs.

If you smooth the walls and ceilings with a wall sander, you will no longer inhale unpleasant dust that is dangerous for your respiratory system, as the wall sander can be connected to the suction device via the 4.0 m long flexible suction hose included in the kit. which continuously sucks out the unpleasant dust that is released during grinding.

The wall grinder is extremely easy to operate with a large additional movable handle. Due to its light weight, you will smooth more rooms without much effort. You will not need any ladders or scaffolding when smoothing the walls, as you will reach all corners of the ceiling with a 1500 mm long wall sander.

The wall sander can be stretched and shrunk as desired during work. For easier transport, it can be shortened to a length of 1200 mm, and for smoothing high ceilings, it can be stretched up to 1500 mm. When the wall sander is stretched or shrunk, any extended position can be maintained with a lock.

For better balance and greater control at work, the wall sander has an additional handle.

The flexible sanding head of the wall sander will allow you to smooth each wall from floor to ceiling without having to change position.

The wall grinder has a diamond plate on which are two diamond cutting rings.

The wall grinder is powered by a powerful 1010 W electric motor with replaceable carbon brushes and a disk drive via a steel cable. You get two spare brushes in the kit.

You can adjust the smoothing speed of the surfaces with the button on the handle of the wall sander. The wall grinder has a built-in grinding head (grinding disc), Ø 125 mm in diameter, which rotates at a speed of 1700 or 3500 rpm.