Wall grinder - GIRAFFE 340 F - Sanders for walls and concrete

General description of wall grinder - giraffe 340 F

With the giraffe wall sander, walls and ceilings can be smoothed up to four times faster than by hand sanding before whitewashing. After sanding, the wall or ceiling will be completely smoothed, which will not leave scratches, holes, scratches, lumps and other unevenness or irregularities later after bleaching. The walls and ceilings will be perfectly flat. It is also possible to remove old coatings of wall paint with a wall sander.

If you smooth the walls and ceilings with a wall sander, you will no longer inhale unpleasant dust that is dangerous for your respiratory system, as the wall sander can be connected to the suction device via the 4.0 m long flexible suction hose included in the kit. which continuously sucks out the unpleasant dust that is released during grinding.

Due to its light weight, you will smooth 10 rooms and more without much effort. You will not need any ladders or scaffolding when smoothing the walls, as you will reach all corners of the ceiling with a 1780 mm long wall sander.

The wall sander can be stretched and shrunk as desired. For easier transport, it can be folded into a suitcase and stretched to 1780 mm for smoothing high ceilings. For better balance and greater control at work, the wall sander has a handrail installed.

The flexible sanding head of the wall sander will allow you to smooth all the walls from floor to ceiling without having to change position.

The wall sander has sanding paper mounted using a self-adhesive hedgehog, which effectively prevents sanding paper from falling out of the sanding head during smoothing.

The wall grinder is powered by a powerful 600 W electric motor with replaceable carbon brushes and direct disk drive. You get two spare brushes in the kit.

You can adjust the smoothing speed of the surfaces continuously with the button on the handle of the wall sander. The wall grinder has a built-in grinding head (grinding disc), diameter Ø 225 mm, which rotates at a speed of 450 to 1050 revolutions per minute.