High pressure electric painting tools

4mm nozzle for plaster gun

0.0

On backorder

2⁴⁹ ^€ 4²⁵ ^€ -41%

+ −

Replacement nozzle for A532020 plaster gun with a diameter of 4 mm.

2.0mm nozzle

0.0

On backorder

2⁸² ^€ 4³⁵ ^€ -35%

+ −

Nozzle 2.0mm PANSAM A730203 for A730200 painting unit

2.5mm nozzle

0.0

On backorder

2⁸² ^€ 4³⁵ ^€ -35%

+ −

Nozzle 2.5mm PANSAM A730204 for A730200 painting unit

6mm nozzle for plaster gun

0.0

On backorder

2⁹⁴ ^€ 4²⁵ ^€ -31%

+ −

Replacement nozzle for A532020 plaster gun with a diameter of 6 mm.

30 rod filter

0.0

On backorder

3⁵⁵ ^€ 5⁶⁸ ^€ -38%

+ −

The use of Filters prevents dirt or debris from entering the spray system. They minimize the possibility of clogging the nozzle and optimize the quality of work that is to be done. The size of a filter is determined by its mesh number. The denser the mesh (the higher the value), the more...

60 rod filter

0.0

On backorder

3⁵⁵ ^€ 5⁶⁸ ^€ -38%

+ −

The use of Filters prevents dirt or debris from entering the spray system. They minimize the possibility of clogging the nozzle and optimize the quality of the finish. The size of a filter is determined by its mesh number. The denser the mesh, the more filtered the material will be. Features...

100 rod filter

0.0

On backorder

3⁵⁵ ^€ 5⁶⁸ ^€ -38%

+ −

The use of filters prevents dirt or debris from entering the spray system. They minimize the possibility of clogging the nozzle and optimize the quality of work that is to be done. The size of a filter is determined by its mesh number. The denser the mesh (the higher the value), the more...

Rod filter 060 for pressure gun

0.0

On backorder

6⁸² ^€ 10⁹⁸ ^€ -38%

+ −

The use of filters prevents dirt or debris from entering the spray system. They minimize the possibility of clogging the nozzle and optimize the quality of work that is to be done. The size of a filter is determined by its mesh number. The denser the mesh (the higher the value), the more...

100 rod filter for pressure gun

0.0

On backorder

6⁸² ^€ 10⁹⁸ ^€ -38%

+ −

The use of Filters prevents dirt or debris from entering the spray system. They minimize the possibility of clogging the nozzle and optimize the quality of work that is to be done. The size of a filter is determined by its mesh number. The denser the mesh (the higher the value), the more...

1.0 mm nozzle with a needle

0.0

On backorder

8²³ ^€ 12⁰⁸ ^€ -32%

+ −

Replacement nozzle with needle for DED7410 painting unit. Nozzle size 1.0 mm.

1.5 mm nozzle with a needle

0.0

On backorder

8²³ ^€ 12⁰⁸ ^€ -32%

+ −

Replacement nozzle with needle for DED7410 painting unit. The nozzle size is 1.5 mm

1.8mm nozzle with a needle

0.0

On backorder

8²³ ^€ 12⁰⁸ ^€ -32%

+ −

Replacement nozzle with needle for DED7410 painting unit. The nozzle is 1.8mm in size

1.0 mm nozzle with a needle

0.0

On backorder

8²³ ^€ 11⁷¹ ^€ -30%

+ −

Replacement nozzle with needle for DED7413 painting unit. Nozzle size 1.0mm

1.5 mm nozzle with a needle

0.0

On backorder

8²³ ^€ 11⁷¹ ^€ -30%

+ −

Replacement nozzle with needle for DED7413 painting unit. The nozzle size is 1.5 mm

1.8mm nozzle with a needle

0.0

On backorder

8²³ ^€ 11⁷¹ ^€ -30%

+ −

Replacement nozzle with needle for DED7413 painting unit. The nozzle is 1.8 mm in size

2.5 mm nozzle with a needle

0.0

On backorder

8²³ ^€ 11⁷¹ ^€ -30%

+ −

Replacement nozzle with needle for DED7413 painting unit. The nozzle size is 2.5 mm

Tank for painting unit # A730200

0.0

On backorder

8⁹³ ^€ 12⁴⁵ ^€ -28%

+ −

Spare PANSAM A730202 tank for A730200 painting unit Technical data: Capacity: 800ml Material: Plastic

Filter (suction) for A730010

0.0

On backorder

13⁶³ ^€ 21⁶⁰ ^€ -37%

+ −

A replacement suction filter for the A730010 painting unit.

Gun cleaning kit. high pressure painting

0.0

On backorder

13⁶³ ^€ 20⁴⁹ ^€ -33%

+ −

A set of 9 elements for cleaning high-pressure paint sprayers

Suction filter for DED7423

0.0

On backorder

17⁸⁶ ^€ 28⁵⁵ ^€ -37%

+ −

The suction filter for the DED7423 painting unit. It prevents the ingress of dirt during paint suction.

Set for precision painting with an airbrush

0.0

On backorder

19²⁷ ^€ 29²⁸ ^€ -34%

+ −

The set for precision painting with an airbrush is designed for spray painting small elements or with complex shapes. Most often used in modeling, but it will also work well during DIY. The kit can be powered by a low pressure 1-3.5 bar (15-50 PSI) compressor as well as a can of compressed gas...

Filter (suction) for DED7422

0.0

On backorder

22⁰⁹ ^€ 35¹³ ^€ -37%

+ −

Suction filter for DED7422 and DED7423 painting units. It prevents the ingress of dirt during paint suction.

Sandblasting gun with hose

0.0

On backorder

24⁹¹ ^€ 34⁰⁴ ^€ -27%

+ −

The sandblasting gun is used to clean various surfaces with sand applied under high pressure, eg. Cleaning metal parts from old paint coatings. The gun has a hose with an aluminum tip to collect the abrasive. Technical data: Recommended working pressure: 3-5 bar Quick Coupler: 1/4 "...

Spray gun extension, 50 cm long

0.0

On backorder

26⁷⁹ ^€ 42⁰⁹ ^€ -36%

+ −

The spray gun extension is used for painting hard-to-reach places, e.g. ceilings, high walls Technical data: Length: 50cm

Top tank spray gun

0.0

On backorder

27⁰³ ^€ 38⁴³ ^€ -30%

+ −

The spray gun with an upper reservoir is designed for painting with solvent-based and water-based paints such as latex, acrylic, stains or metal primers. The gun is equipped with an upper tank with a capacity of 500 ml. There is a knob at the rear of the gun, with which you can adjust the amount...

Spray gun for # A730200

0.0

On backorder

28⁹¹ ^€ 41³⁵ ^€ -30%

+ −

Spray gun PANSAM A730201 for HVLP painting unit PANSAM A730200 It has been designed for the application of stains, paints, enamels, substances protecting metal, wood, water-based varnishes intended for spray painting. Features: quick and precise painting Adjustable spray pattern by...

Nozzle 415 for a pressure gun

0.0

On backorder

29¹⁴ ^€ 46⁴⁹ ^€ -37%

+ −

The nozzle is responsible for spraying the paint with the appropriate width of the stream and a specific flow value. The element is easily attached to the gun, without the need for complicated tools. Features: long service life ease of assembly Technical data: Nozzle Orifice...

Nozzle 515 for a pressure gun

0.0

On backorder

29¹⁴ ^€ 46⁴⁹ ^€ -37%

+ −

The nozzle is responsible for spraying the paint with the appropriate width of the stream and a specific flow value. The element is easily attached to the gun, without the need for complicated tools. Features: long service life ease of assembly Technical data: Nozzle Orifice...

Nozzle 517 for a pressure gun

0.0

On backorder

29¹⁴ ^€ 46⁴⁹ ^€ -37%

+ −

The nozzle is responsible for spraying the paint with the appropriate width of the stream and a specific flow value. The element is easily attached to the gun, without the need for complicated tools. Features: long service life ease of assembly Technical data: Nozzle Orifice...

Spray gun lower tank

0.0

On backorder

31²⁶ ^€ 42⁰⁹ ^€ -26%

+ −

The paint spray gun with a bottom tank is designed for painting with solvent-based and water-based paints such as; latex and acrylic paints, stains or primers for metal. The gun is equipped with a bottom tank with a capacity of 750 ml. At the back of the pistolote there is a knob with which you...

Nozzle 411 for airless gun

0.0

On backorder

31⁴⁹ ^€ 50⁵⁰ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. 411 nozzle - angle 40 °. The remaining two digits in 411...

Nozzle 413 for airless gun

0.0

On backorder

31⁴⁹ ^€ 50⁵⁰ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. nozzle 413 - angle 40 °. The remaining two digits in 413...

Nozzle 417 for airless gun

0.0

On backorder

31⁴⁹ ^€ 50⁵⁰ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. nozzle 417 - angle 40 °. The remaining two digits in 417...

Nozzle 517 for airless gun

0.0

On backorder

31⁴⁹ ^€ 50⁵⁰ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. 517 nozzle - 50 ° angle. The remaining two digits in 517...

Protective cover for # DED7421

0.0

On backorder

31⁴⁹ ^€ 50¹⁵ ^€ -37%

+ −

The Dedra DED7445 nozzle cover is dedicated to the DED7440 pressure gun Features: The nozzle can be installed without the need for tools Large sealing surface - tightness and strong pressure of the nozzle Ensures free rotation of the nozzle (vertical and horizontal painting

Nozzle 515 for airless gun

0.0

On backorder

32⁹⁰ ^€ 52⁷¹ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. 515 nozzle - 50 ° angle. The remaining two digits in 515...

Nozzle 519 for airless gun

0.0

On backorder

32⁹⁰ ^€ 52⁷¹ ^€ -38%

+ −

The nozzle is a key element that should be properly selected depending on the type of paint (paint thickness) and the surface to be covered with the paint. The first digit of the nozzle code indicates the angle of the paint stream, e.g. 519 nozzle - 50 ° angle. The remaining two digits in 519...

Pressure gun nozzle cover

0.0

On backorder

33⁶¹ ^€ 53⁸⁰ ^€ -38%

+ −

The Dedra DED7435 nozzle cover is dedicated to the DED7440 pressure gun. Features: The nozzle can be installed without the need for tools Large sealing surface - tightness and strong pressure of the nozzle Ensures free rotation of the nozzle (painting vertically and horizontally)

Paint spray gun upper tank alu

0.0

On backorder

35²⁵ ^€ 50¹⁵ ^€ -30%

+ −

The spray gun with an upper reservoir is designed for painting with solvent-based and water-based paints such as latex, acrylic, stains or metal primers. The gun is equipped with an upper tank with a capacity of 500 ml. At the back of the gun there is a knob with which we can regulate the amount...

Pneumatic plastering gun

0.0

On backorder

58⁷⁵ ^€ 69⁵⁴ ^€ -16%

+ −

The plastering gun is intended for applying external plasters, priming, painting with high-density paints. The capacity of the tank is 5 L. The set with the gun includes 3 nozzles, thanks to which you can easily choose the right nozzle diameter for the medium used. Features: 3 nozzle...

Repair kit for # DED7421

0.0

On backorder

65⁸⁰ ^€ 104⁶⁸ ^€ -37%

+ −

Repair kit for the DED7421 painting unit, including: suction filter piston hex key piston seals sealing rings keyway keys brush filter

HVLP paint spray gun nozzle 1.4 mm 600 ml 2.0-3.5 bar

0.0

On backorder

72⁶² ^€ 87⁸⁴ ^€ -17%

+ −

The spray gun with an upper reservoir is designed for painting with solvent-based and water-based paints such as latex, acrylic, stains or metal primers. The gun is equipped with an upper tank with a capacity of 500 ml. At the back of the pistolote there is a knob with which you can adjust the...

7.5m 1/4 "" high pressure hose for # A730010, DED7422

0.0

On backorder

80⁶¹ ^€ 125⁵⁴ ^€ -36%

+ −

High-pressure hose 7.5m 1/4 "for DEDRA DED7437-07 painting units 7.5 m pressure hose interchangeable to high-pressure painting units. Suitable for DED7421, DED7422, DED7423 painting units Technical data: Length: 7.5m Mounting hole: 1/4 "

Repair kit for A730010

0.0

On backorder

89⁷⁷ ^€ 143⁸⁴ ^€ -38%

+ −

A repair kit containing a set of gaskets and O-rings, needed for independent replacement and maintenance of the A730010 painting unit.