Industrial vacuum cleaner 1400 W 30 L

Industrial vacuum cleaner 1400 W 30 L

The industrial vacuum cleaner is suitable for dry and wet vacuuming. It can be used in the car, in the apartment and also outdoors, and it is also an excellent tool for cleaning workshops and various renovations of buildings. With an additional socket, it can be used in combination with electrical devices that require dust extraction for their work.

In addition to the possibility of dry and wet suction, blowing is also possible. You will now be able to blow dirt and leaves out of hard-to-reach areas as well.

The vacuum cleaner is distinguished by a 30-liter stainless steel container with a diameter of 295 mm. The container will retain all types of dirt from liquids to dust, which is released when grinding and cutting building material. After vacuuming, simply unfasten and remove the upper part of the vacuum cleaner with two clips, then remove the filter and empty the contents of the 30-liter container into the waste container, or pour the liquid into the space provided. The vacuum cleaner will be ready for work again according to the described procedure.

The vacuum cleaner contains two reusable filters that can be easily removed and later cleaned with warm water.

In addition to the industrial vacuum cleaner, the set also includes a 1.5 m long suction hose with a diameter of 32 mm, a 27 cm plastic handle through which you can adjust the suction power, a two-part plastic non-vacuum suction hose 85 cm long, which can be disassembled (shortened by half to 44 cm), a nozzle for cracks and other narrow areas, a 30 cm suction nozzle for sucking liquids from the ground and a nozzle with 2 cm bristles and a movable neck for sucking dust and stubborn glued dirt, which is removed by rubbing.

The 30-centimeter suction nozzle for sucking liquids from the floor has two built-in wheels for easier movement on the floor, a flexible neck, bristles and a rubber band, which allows the brush not to leave liquids behind.

At the top, in addition to a large transport handle, the vacuum cleaner has a built-in socket for connecting power tools that require dust extraction for their operation (wall grinders, grinding machines ...). The socket is connected via a vacuum cleaner in such a way that after switching on the power tool, which requires dust extraction for its operation, the vacuum cleaner is automatically switched on with a short time delay. Also, a vacuum cleaner with a short time delay automatically shuts off when the electrical appliance is stopped.

The industrial vacuum cleaner has four convenient spaces above the wheels for storing suction nozzles and suction hoses. The nozzles are always at hand, and at the same time they are firmly attached to the vacuum cleaner and do not fall out of it.

The vacuum cleaner is extremely stable. We can pull it behind us without tipping over, as it stands on four wheels that rotate in all directions. We use a large transport handle to carry the vacuum cleaner.

In addition to the vacuum cleaner and other accessories, the kit also includes an additional connection that allows the vacuum cleaner to be quickly connected to other suction hoses, such as hoses from other power tools.