Industrial vacuum cleaner 2000 W 80 L - RENT

General description of the industrial wet dry vacuum cleaner 2000 W 80 L

The industrial vacuum cleaner is suitable for dry and wet vacuuming. It can be used in the car, in the apartment and also outdoors, and it is also an excellent tool for cleaning workshops and various renovations of buildings, as well as other larger areas.

The vacuum cleaner is distinguished by an 80-liter stainless steel container with a diameter of 420 mm. The container will retain all types of dirt from liquids to dust, which is released when grinding and cutting building material. After the dry suction is finished, simply unclip and remove the upper part of the vacuum cleaner with two buckles, then remove the filter and the platform with wheels over the two buckles. Empty the contents of the 80 liter container into the waste container. The vacuum cleaner will be ready for work again according to the described procedure.

After wet suction is complete, the dirty liquid can be easily drained by removing the stopper via a 72 cm folding drain pipe located at the bottom of the stainless steel container. To completely drain the liquid, the stainless steel container can be removed from the platform with wheels and the dirty liquid poured out.

The vacuum cleaner has two built-in electric suction motors with a total power of 2000 W. The motors can be operated hkati or one of them can be switched off via a switch. The power of a vacuum cleaner with one electric vacuum motor is 1000 W.

The vacuum cleaner contains a reusable filter that can be easily removed and later cleaned with warm water.

In addition to the industrial vacuum cleaner, the set also includes a 1.5 m long suction hose with a diameter of 48 mm, a two-part stainless steel suction hose with a length of 128 cm, which can be disassembled if desired (shortened by half to 67 cm), a slit nozzle and other narrow areas, a 36 cm suction nozzle for sucking liquids from the floor, a 36 cm suction nozzle for sucking dry floors and a nozzle with 3 cm bristles for sucking dust and stubborn adhered dirt, which is removed by rubbing.

The 36 cm suction nozzle for sucking liquids from the ground has two built-in wheels for easier movement on the floor, a revolving door, two movable, on one side serrated rubber bands that prevent the leakage of liquid behind, as the vacuum cleaner due to the high suction power generated under brush suction

The 36 cm dry floor suction nozzle has two built-in wheels for easy movement on the floor, a rotating neck, two types of bristles, of which the first type of bristles has cut openings where dirt enters, the second type of bristles has no openings and prevents dirt from suction remained on the surface, as the vacuum cleaner sucks it due to the high suction power generated under the brush.

The industrial vacuum cleaner has four convenient spaces above the wheels for storing suction nozzles and suction hoses. The nozzles are always at hand, and at the same time they are firmly attached to the vacuum cleaner and do not fall out of it.

The vacuum cleaner is extremely stable. We can pull it behind us without tipping over as it stands on four wheels. Of these, the first two wheels rotate in all directions, and the last two, due to the large diameter of Ø 15 cm, allow the vacuum cleaner to ride even on more difficult and varied terrain. We use a large metal handle and a transport handle on the top of the vacuum cleaner to carry and push the vacuum cleaner.

For easier transport on inaccessible terrain or for permanent placement of the vacuum cleaner in a certain place, the platform with wheels can be removed. Remove it with the help of two guards. There is a handle on the bottom of the stainless steel container to make it easier to carry the vacuum cleaner without wheels.