Intelligent Dual Channels Rework Station ST-8802

•  Large LCD screen; Temp/Air adjust easily.
•  Touch sensor inside, auto sleep function will take effect when hot air gun placed on the stand.
•  Use brushless vortex fan making cyclone air output more gentle and evenly.
•  Offer 4 nozzles
•  Has automatic large air volume cooling function, effectively protect the life of heating core and handle.
•  Has independent cold air function, can deal with special use purpose.
•  Three sets of quick temperature keys, can be set and save independently, use easily.
•  Has password protection and key lock function, make control easily.
•  With timing function and temperature compensation function, make use flexibly.

♦  Easy Temperature/Air Flow Setting

1. Adjust the air flow value by AIR knob, "+" / "-" to increase/reduce the air volume. 

2. Adjust the temperature value by pressing “▲” or “▼”, long press can be quickly adjusted. 

3. Saving and Call 3 Sets Shortcut Temperature by pressing button “1”/ “2”/ “3”.

♦  Temperature Lock Function

Under Menu Loc, it can turn on or off temperature lock function by pressing “▲” or “▼” key; then press Button “2” to exit and save your setting.

♦  Temperature Calibration

Under menu CAL mode, press “▲”or“▼” key to enable temperature calibration function, which calibration range is -50℃~ 50℃(-90℉~90℉). Calibration value will be negative as actual-measured temperature is lower than setting temperature; Calibration value will be positive as actual-measured temperature is higher than setting temperature.

♦  ℃/℉ available

In menu C-F mode, it can switch temperature unit ℃/℉ by pressing “▲” or “▼” key.

♦  Password Setting Function 

In PSD menu, press “▲” or “▼” to adjust password setting value, which can be set from 01 to 999. “00” means password function is off. Default no password for the first time entrance. (Note: Directly input 906 password to enter menu in case of forgot the password.)

♦  Beeping function

Under menu BL mode, it can turn on/ off the beeping function by pressing “▲” or “▼”key.

♦  Auto-sleep/Standby Function of Soldering Iron

In SLP menu, press the right side “▲” or “▼”key to turn ON/OFF auto sleep function. Soldering iron auto-sleep time setting range is 0-60mins (default 10mins). In sleep mode, heater temperature is 200℃. Picking up the soldering iron and it will back to normal working mode. The hot air gun will enter into sleep mode automatically when putting it on the holder.

♦  Auto shut down function/Heating closed mode

LCD display OFF, soldering iron/hot air gun will not heating, need to press power button to turn on.

♦  Cool Air Function of Hot Air Gun

When setting temperature under 100℃, or press shortcut key “1”, the hot air gun will enter into cool air mode. LCD display C-L and heating element turn off heating and hot air gun blows cool air.

♦  Timing function of Hot Air Gun

Under menu HT mode, it can adjust time of timing function by pressing “▲” or “▼” key. Time range from 10 to 900 seconds.

♦  Fault alarm function 

Model:	ST-8802
Handle	Soldering Iron	Hot Air Gun
Voltage	110VAC/220VAC ±10%  50Hz/60Hz    optional
Fuse type	T5A(230VAC) T10A(110VAC)
Power	65W	800W
Temperature range	80℃~480℃/ 176℉~896℉	100℃~500℃/212℉~932℉
Temperature stability	±2℃	±5℃
Air volume adjustment		Knob control
Temperature adjustment	Long press to adjust 10 unit at a time;      Short press to adjust 1 unit at a time.
Standby mode	0~60mins	Will enter into sleep mode automatically when putting hot air gun on the holder.
Turn off heating function	After 10mins standby will turn off heating.	Put hot air gun on the holder for 30mins will turn off heating.
Shortcut temperature	3 sets
Working conditions	Temperature 0-40°C, relative humidity <80%
Storage conditions	Temperature -20-80°C, relative humidity <80%
Dimension	29.5*24.8*18.8cm
Weight	2.75KG