Portable manual hydraulic electric iron cutter 950 W 20mm

Portable manual hydraulic electric iron cutter 950 W Ø4-20mm

The portable manual hydraulic electric cutter for reinforcing iron is primarily intended for construction companies and other craftsmen engaged in concreting foundations, concrete slabs and concrete walls. Before concreting, it is necessary to install steel ribbed reinforcement in the prescribed places, which improves the static strength of the building and is later filled with concrete.

In the process of installing steel fittings, it is necessary to shorten them in most cases before the prepared steel bars. A portable hand-held hydraulic cutter for pinching reinforcing steel is a very suitable tool for this task. With the portable manual hydraulic clipper, it is possible to cut iron bars for other purposes as well, not only for construction needs.

The portable manual hydraulic fin cutter for corrugated steel is light, small, quiet and easy and safe to use. It is made of a highly resistant metal-plastic housing. There is no spark, noise, dust or odor when cutting the iron. The steel bar cutter has a large auxiliary side handle mounted on the side for more comfortable and safer work. The handle can be removed for easy storage.

The portable manual hydraulic electric cutter for ribbed steel has a built-in tested and reliable 950 W electric motor. The motor helps cut all types of ribbed steel bars and fittings from 4 to 20 mm in diameter. The cutting speed of concrete steel is from 3.5 to 4.5 seconds. During cutting, an easily adjustable screw ensures that the steel reinforcing bars are in place.

The connection of the portable manual hydraulic electric ribbed cutter to the mains is arranged with a 250 cm connection cable. The electrical connection cable is additionally reinforced at the output of the electric motor of the portable manual hydraulic-electric concrete cutter. Reinforcement prevents excessive bending and physical damage to the electrical connection cable.

The portable hydraulic-electric concrete cutter is stored, among other tools, in a robust blue metal case, which protects the contents from shocks and makes it easier to carry the portable manual hydraulic-electric concrete cutter for iron, and the associated tools. The metal case has openings through which the case can be locked with two padlocks.

In addition to the portable hand-held electric steel cutter, the metal case contains a hand-held compressible oil / lubricator with a 9 cm needle for adding oil to the portable electric ribbed steel cutter. Additional hydraulic oil is stored in the grease / oil pan for maintenance purposes. Pouring hydraulic oil into the portable hydraulic electric cutter for pinching the reinforcing iron is enabled by simply unscrewing the screw. Unscrewing the screw for topping up the hydraulic oil, and other settings can be done with double-sided fork wrenches with external dimensions of 17 and 14 mm and 19 and 22 mm, which is added to other tools in a steel case.

In the case of the use of an individual graphite brush / brush in the electric motor of a portable manual hydraulic-electric cutter of steel fittings, they can be replaced by simply unscrewing one screw. Similarly, it is possible to replace an individual cutting jaw of a hydraulic electric cutter for cutting steel fittings by unscrewing two screws.