DRYER WITH REDUCER 1/2 "V2
A professional VERKE filter reducer. When used in the pneumatic installation, it fulfills the following functions:
FILTER - air purification of oil, condensate and solid particles,
REDUCER - setting and maintaining a constant value of the output pressure.
The filter module is equipped with a filter insert. The condensate is deposited in a screw-on container with a manual drain. When the container is full (to the level of approx. 10 mm below the filter element), remove the condensate by opening the drain valve. The measuring range of the manometer is 0 - 16 bar. The dial is graduated in bars with a graduation with an accuracy of 0.2 bar. The pressure gauge can be installed to the port on the filter reducer housing - you can choose between two pressure gauge connections: front or rear. Plug the unused port with the supplied plug.
The pressure is regulated by a large, convenient knob on the top of the device. The knob has a lock protecting against unintentional change of setting - before adjustment, it must be unlocked by pulling it up.
The set with the filter reducer includes a rear mounting bracket with screws, a quick coupling and a plug.
TECHNICAL DATA:
- input / output - 1/2 "
- dual scale pressure gauge (bar / MPa)
- working pressure - 0-16 bar / 0-230 psi
- admissible working temperature: 60 ° C
- pressure regulation with lock
- water drain valve
- mounting bracket
No reviews found