Fuel tap 60 L / min with analog meter

Fuel tap 60 L / min with analog meter

Diesel fuel (gas oil - oil), heating oil, petrol and kerosene can be filled with a filling gun with an analog meter. The refueling tap with an analogue meter does not have a built-in automatic (automatic) fuel flow shut-off valve , which interrupts the flow when the full tank (tank) is reached.

The maximum possible flow of the fuel filler handle with an analog meter is 60 L / min. The pouring speed can be easily adjusted by pressing the handle with one hand. It is also possible to adjust the tapping via a three-stage pin located on the handle. The pin can be set to the desired value with one hand by pressing the handle of the refueling gun, and the filling tap will maintain a steady flow of fuel. Also, the preset automatic tapping power can be interrupted by a simple one-handed grip of the handle. When dispensing petroleum products or chemicals, the constant presence and attention of the user is required! Only in the event of an error or accident can the user immediately stop dispensing the liquid! In the event of a spill of petroleum products or chemicals, severe environmental pollution can occur!

The fuel tap with a meter has a handle, and most of the housing is ribbed (profiled), which consequently allows a firm grip, and comfortable and safer work. It is also easier to clean. Most of the tap handle housing is built of robust cast steel. The 18 cm tap tube consists of a high quality and solid, stainless aluminum alloy. On the lower, outer and upper side of the handle, there is an adapted groove for easy placement of the handle on the adapted holder.

The filling gun with analog flow counter has an incised internal thread of diameter Ø 25 mm (1 inch - 1 "- 1 inch). The actual external diameter of the internal thread, including possible wall thicknesses of the connected metal pipe, is Ø 33.7 mm. fuel 60 L / min with analog fuel flow meter can be connected additionally added, made of high-quality strong aluminum alloy, built-in connection with built-in fine, easy legal filter and rubber seal with external thread for screwing on the tap on one side and ribbed relief for stronger connection to the pressure or suction pipe with a clamp on the other side of the aluminum alloy connection. Larger, external thread on the connection is Ø 25 mm in diameter (1 inch - 1 "- 1 inch), the actual external diameter of the larger external thread with included metal thread wall thicknesses is Ø 33.7 mm. The smaller additional connection with external ribbed relief has a diameter of Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch), the actual outer diameter of the smaller connection with ribbed relief with included metal thread wall thicknesses is Ø 26.9 mm.

Fueling tap 60 L / min, has a four-digit high-precision digital meter (from 0 to 9999) for measuring the single flow of diesel fuel in liters, for measuring the amount of diesel fuel flow in liters. The diesel flow meter can be reset. The accuracy of measuring the fuel flow on the meter is ± 1%.

The maximum pressure (pressure) of the liquid in the fuel tap with an analog meter is 3.5 bar.

The fuel filler gun with analog counter has a low resistance which causes the least loss of flow power during refueling.