Hand pump for pressure test 240 bar with tank
General description of the 240 bar pressure test hand pump with tank
With the hand pump for a pressure test of 240 bar with a container, various pipelines can be filled with liquid at the required pressure (pressure). Later, through the built-in pressure gauge or. pressure (manometer) is monitored or the pipeline is tight. It is mainly used for solar installations, floor heating systems, heating pipe distribution, etc.
In addition to the hand pump, the set also includes a 95 cm pressure hose, a suction hose, a filter on the suction hose and a 10-liter container from which we pump liquid into the pipeline. The pump can also be used on its own without a container.
The connection diameter of the connecting pressure pipe is Ø 12.7 mm (1/2 inch - 1/2 "- 1/2 inch) with an external thread. By unscrewing and replacing the coupling, you can also install a pressure pipe of a different diameter. You can also easily replace the suction pipe with a longer tube.
Excess liquid or air can be drained via the vent screw (air outlet) or water outlet in the event of excessive pressure in the filling unit.
No reviews found