Hand pump for pressure test 25 bar with tank
General description of the 25 bar hand pump for pressure test with tank
With a hand pump for a pressure test of 25 bar, a container can be used to fill various pipelines with liquid at the required pressure. Later, through the built-in pressure gauge or. pressure (manometer) is monitored or the pipeline is tight. It is mainly used for solar installations, floor heating systems, heating pipe distribution, etc.
In addition to the hand pump, the set also includes a 95 cm pressure hose, a suction hose, a filter on the suction hose and a 5-liter container from which we pump liquid into the pipeline. The pump can also be used on its own without a container.
The connection diameter of the connecting pressure pipe is Ø 12.7 mm (1/2 inch - 1/2 "- 1/2 inch) with an external thread. By unscrewing and replacing the coupling, you can also install a pressure pipe of a different diameter. You can also easily replace the suction pipe with a longer tube.
The flow rate of the liquid per push of the pump lever (lever stroke) is 13 ml.
Excess liquid or air can be drained through the vent screw (air outlet) or water outlet in the event of excessive pressure in the filling unit.