Catalog :: Bestsellers

3” multi-stage deep well sand resistant pump 100 l/min 62 m 750 W 230 V

0.0

In stock

340⁰⁰ ^€

+ −

Description of 3” multi-stage deep well sand resistant pump 100 l/min 62 m 750 W 230 V 75 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the selection of...

Power750 W Immersion depth (max.)62 m

Motor multi-purpose garden tool 4in1 2250W with extension

0.0

In stock

350⁰⁰ ^€

+ −

General description of 4v1 2250 W motor multi-purpose garden tools with extension The 4in1 motor multi-purpose tool is intended for pruning branches, cutting hedges, mowing grass and pruning harder plants. The tool is a handy tool for working in the orchard and on the lawn. With the maximum...

Power2250 W Engine displacement52 cm3

Vacuum cleaner with a water filter 1400W

0.0

In stock

350⁰⁰ ^€ 439⁹⁴ ^€ -20%

+ −

Workshop vacuum cleaner with a water filter DEDRA DED6602 Workshop vacuum cleaner DED6602, designed for dry and wet operation (water extraction). It allows you to clean any surfaces in residential and commercial spaces, allowing you to quickly and conveniently arrange the workplace, removing...

4” submersible deep well monoblock pump 50 l/min 120 m 1500 W 230 V

0.0

In stock

350⁰⁰ ^€

+ −

Description of 4” submersible monoblock pump 50 l/min 120 m 1500 W 4" (98 mm diameter) deep well peripheral pumps. Pump are designed for at least 4-inch wells. Durable materials such as stainless steel and brass have been used in the construction of impeller pumps. Application...

Power1500 W Immersion depth (max.)120 m

COMPRESSOR FOR W-3090 COMPRESSOR - TISTO

Motor oil compressor 300 l 10 bar for W-3090

0.0

On backorder

354²⁰ ^€

+ −

COMPRESSOR FOR W-3090 COMPRESSOR three-cylinder compressor cylinder diameter - 90x3 lubricated with oil device cylinders made of cast iron driven by a pulley which simultaneously cools the compressor effective capacity: 900 l/min working pressure: 6-8 bar maximum pressure: 10...

Vacuum pump 284 L / min 745 W two-stage

0.0

In stock

360⁰⁰ ^€

+ −

Vacuum air conditioning pump 284 L / min 745 W two-stage The vacuum pump with a power of 284 W and a flow rate of 745 l / min is suitable for maintaining the air conditioner by removing moisture and air from the system. In addition, it is used for the maintenance of vehicle cooling systems, in...

Power745 W Flow284 l / min

3” multi-stage deep well sand resistant pump 70 l/min 117 m 1100 W 230 V

0.0

In stock

360⁰⁰ ^€

+ −

Description of 3” multi-stage deep well sand resistant pump 70 l/min 117 m 1100 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps, with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...

Power1100 W Immersion depth (max.)117 m

4” multistage deep well sand resistant pump 94 l/min 103 m 1100 W 230 V

0.0

In stock

360⁰⁰ ^€

+ −

Description of 4” multistage deep well sand resistant pump 94 l/min 103 m 1100 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...

Power1100 W Immersion depth (max.)103 m

Multi-stage deep well pump 67 l/min 94 m 1100 W 102 mm 230 V

0.0

Out of stock

370⁰⁰ ^€

+ −

General description of multi-stage deep well pump 67 l/min 94 m 1100 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...

Power1100 W Immersion depth (max.)94 m

dizelsko gorivo z ohišjem in tlačnim stikalom

Self-priming electric diesel pump with housing and pressure switch

0.0

Out of stock

370⁰⁰ ^€

Description of self-priming electric diesel pump with housing and pressure switch With the self-priming electric diesel pump with housing and pressure switch, you can pump and fill diesel fuel (gas oil - oil) and heating oil. Conversely, volatile liquids, other highly flammable liquids,...

Power750 W Fluid flow rate (maximum pumping speed)4200 litrov/uro

Brusilnik za beton - ŽIRAFA 1010 W 1 - TISTO

Concrete grinder - ŽIRAFA 1010 W

0.0

In stock

380⁰⁰ ^€

+ −

General description of a diamond wall grinder With the giraffe wall sander, it is possible to smooth walls and ceilings up to four times faster before whitewashing than with manual sanding. After sanding, the wall or ceiling will be completely smoothed, which will not leave scratches, holes,...

Power1010 W Grinding head rotation speedfrom 1700 to 3500 obratov/min

Milling and grinding machine for surfaces concrete

0.0

In stock

380⁰⁰ ^€

+ −

Electric pressure test pump 60 bar with tank

0.0

In stock

390⁰⁰ ^€ 450⁰⁰ ^€ -13%

+ −

- For testing and filling underfloor heating pipes, radiator heating pipes, solar system .... - Filling and test pressure 60 bar - Pumping water and aqueous solution with antifreeze additive - Container with lid for filling liquid - Flow rate of liquid 2.7 liters per minute - Two...

Filling and test pressureUp to 60 bar Flow2.7 L / min

4” multistage deep well sand resistant pump 120 l/min 102 m 1100 W 230 V

0.0

In stock

400⁰⁰ ^€

+ −

Description of 4” multistage deep well sand resistant pump 120 l/min 102 m 1100 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...

Power1100 W Immersion depth (max.)102 m

750 W grinder for the surface plaster. LED, internal dust extraction, suitcase

0.0

On backorder

419²⁴ ^€ 566⁵⁶ ^€ -26%

+ −

Plaster sander with gear, giraffe, 750 W turbo, 225 mm, LED, plaster, case The grinder is designed for grinding plaster surfaces. Thanks to the motor mounted directly on the blade, the drive is transmitted through a gear transmission. This solution eliminates the drive through the cable and...

Gasoline vibrating needle 4100 W

0.0

In stock

425⁰⁰ ^€

+ −

Why buy a concrete vibrator? Because the electric vibrating needle is suitable for vibrating foundations, concrete slabs and concrete walls. Because in the package, in addition to the 4100 watt petrol engine with a reinforced rotating steel housing, you also get a 6-meter vibro tube with a...

Power5600 W Vibrating tube length5 m

COMBUSTION PUMP FOR WATER PRESSURE 2 "

0.0

On backorder

429⁵⁸ ^€

+ −

An efficient Verke pressure pump has been built into a steel frame that protects it from damage and facilitates transport. It is perfect for irrigation, during drought and for any work requiring water pumping. It was equipped with a powerful 7 HP four-stroke engine. The pump is characterized by...

Vertical hydraulic pipe bending machine 16T

0.0

In stock

430⁰⁰ ^€

+ −

General characteristics of the hydraulic pipe bending machine 16T The hydraulic pipe bender offers easy and fast pipe bending with the help of a hydraulic cylinder and pipe fittings of various sizes. It is used in pipe bending for thermal engineering, making car pipe frames, fences, animal...

Compressive force16 tons Stroke245 mm

Electric heater 15 kW 3 phases

0.0

In stock

430⁰⁰ ^€ 614⁵³ ^€ -30%

+ −

Electric heater, 15 kW, square, red The electric heater is a device intended for use in closed rooms. It is used for heating residential and utility rooms, such as basements, garages, workshops, production halls, warehouses, etc. The device is intended to be used as an additional heat...

Tile cutter 800 W 650 mm

0.0

In stock

450⁰⁰ ^€

+ −

General description of the tile cutter 800 W 650 mm A table tile cutting machine can be a portable device, ideal for cutting wall and floor tiles. Robust and high-quality production of the radial tile cutter enables work of experts of all types. The cutting diamond reel flows in a water bath...

Moč800 W

2T HYDRAULIC-PNEUMATIC WORKSHOP CRANE

0.0

On backorder

466²⁰ ^€

+ −

The presented device is made of very good materials, which makes it a strong, carefully made structure ensuring long-term and safe operation. The crane is equipped with wheels which makes it easy to move around. Equipped with a very fast hydraulic-pneumatic pump. It can be operated...

Lymphatic drainage

0.0

Out of stock

470⁰⁰ ^€

+ −

General description of lymphatic drainage In today's lifestyle, the average person faces inadequate diet, overweight, frequent stress, and very little or no physical activity. All these activities, or. inactivity represents a visible burden on the body that sometimes even becomes painful....

Power28 W Adjustable pressureFrom 20 to 250 mmHg (from 2.67 to 33.33 kPa)

Professional trinocular microscope

0.0

In stock

490⁰⁰ ^€

+ −

General description of a professional trinocular microscope The microscope is distinguished by a simple metal compact design. It has two interchangeable eyepieces and four lenses mounted in the turret. Focusing is performed by moving the table vertically over the coarse and fine focusing...

Microscope typeTrinocular Maximum magnification1600x

Wall Milling Machine 1100 W

0.0

In stock

490⁰⁰ ^€

+ −

Moč1100 W Speed2000 obratov/min

Diamond crown drill 2180 W with stand

0.0

In stock

500⁰⁰ ^€

+ −

General description of the 2180 W diamond crown drill with stand With a strong and robust crown drill with a stand, we can drill into vibrated concrete, reinforced concrete (reinforced concrete), rocks, rocks, concrete and brick walls, concrete slabs, screeds, asphalt and concrete coatings,...

Power2180 W Drilling speed1600 obratov/min

Electric pressure test pump 100 bar with tank

0.0

In stock

520⁰⁰ ^€

+ −

- For testing and filling underfloor heating pipes, radiator heating pipes, solar system .... - Filling and test pressure 100 bar - Pumping water and aqueous solution with antifreeze additive - Container with lid for filling liquid - Fluid flow rate 2.9 liters per minute - Two screw...

Filling and test pressureDo 100 bar Flow2.7 L / min

4” multistage deep well sand resistant pump 200 l/min 76 m 1500 W 230 V

0.0

In stock

520⁰⁰ ^€

+ −

Description of 4” multistage deep well sand resistant pump 200 l/min 76 m 1500 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...

Power1500 W Immersion depth (max.)76 m

Vibratory strip electric 1425 W

0.0

In stock

530⁰⁰ ^€

+ −

Vibratory batten properties for concrete The vibrating lath is intended for leveling the fresh concrete surface. The vibrations affect up to 100 mm deep. The concrete is surface smoothed and air bubbles are squeezed out of the concrete mass. The vibratory batten is 1 m long.

Power200 W

Multi-stage deep well pump 67 l/min 168 m 2200 W 102 mm 230 V

0.0

In stock

550⁰⁰ ^€

+ −

General description of multi-stage deep well pump 67 l/min 168 m 2200 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...

Power2200 W Immersion depth (max.)168 m

Ultrasonic cavitation 2in1

0.0

Out of stock

590⁰⁰ ^€

General description of ultrasonic cavitation Obesity and thus cellulite is one of the scourges of modern man, especially in developed countries. In addition, obesity is very harmful to health, often leading to premature death. As a result, many people undergo weight loss, often using unstudied...

Power75 W Cavitation density5 W/cm^2

Money counting and checking machine - banknotes with keyboard [CLONE]

0.0

In stock

590⁰⁰ ^€

+ −

General description of the apparatus for counting and checking money - banknotes The modernly designed and technically perfect banknote counting machine offers you easy and comfortable everyday work with banknotes. The counter ensures accurate and fast counting with the highest possible...

The speed of counting money1000 kosov/min Banknote feeder capacity200 kosov

Portable manual hydraulic iron cutter 850 W

0.0

In stock

600⁰⁰ ^€

+ −

General description of the portable manual hydraulic iron cutter 850 W The portable manual hydraulic cutter for reinforcing iron is primarily intended for construction companies and other craftsmen engaged in concreting foundations, concrete slabs and concrete walls. Before concreting, it is...

Maximum cutting diameter of corrugated steel16 mm Minimum cutting diameter of corrugated steel4 mm

Oil air heater with flue gas exhaust, thermostat and wheels 35 kW [CLONE]

0.0

Out of stock

600⁰⁰ ^€

35 kW oil air heater with flue gas exhaust, thermostat and wheels The 35 kW oil air heater with flue gas exhaust is intended for indoor use. It is used to heat non-residential premises such as workshops, warehouses, production halls, barns, greenhouses or during renovation and construction...

Green Cell Battery 17.4Ah (835Wh) for Electric Bikes E-Bikes 48V

0.0

On backorder

612⁰¹ ^€

+ −

Zündapp;Haibike;Merida;Raleigh;Specialized;Adore;Adriatica;BMW;Batavus;Byocycles;Curtis;Cutler;Cyclamatic;Daymak;Diamant;Ducati;Easybike;Ecobike;Fenetic;Fischer;Freway;Gazelle;Giant;Greens;Husqvarna;KTM;Kalkhoff;Keeway;Kettler;Kreidler;Kross;Liberty;Lovelec;Navigator;Prodigy;Prophete;Radrover;Ranger;Triumph;Velocity;Whistler;Xplorer;Yamaha;BigCat;48V-Silverfish;

Electric thread cutter 2300 W

0.0

In stock

615⁰⁰ ^€

+ −

Electric manual thread cutter 2300 W The electric thread cutter achieves a thread cutting speed of 26 rpm. The thread cutting speed depends on the size of the thread cutting head used and the hardness of the metal into which the thread is cut. The electric thread cutter can cut threads back...

Power2300 W

Electric Pipe Threader [1/2 "- 1-1 / 4"] 1.8 kW

0.0

On backorder

616⁴¹ ^€

+ −

Pipe threader, electric 1.8 kW, diameters 1/2 ", 3/4", 1 ", 1 1/4" Model electric threader is a device with which we can quickly and efficiently make external threads on steel pipes. The set includes a set of four taps with knives allowing to obtain threads with sizes 1/2 ", 3/4", 1 "and 1...

Electric heater 15 kW 3 phases

0.0

In stock

630⁰⁰ ^€

+ −

Electric heater 15 kW, square, black with the possibility of connecting a collar The electric heater is a device intended for use in closed rooms. It is used for heating residential and utility rooms, such as basements, garages, workshops, production halls, warehouses, etc. The device is...

Horizontal hydraulic pipe bending machine 16T

0.0

In stock

640⁰⁰ ^€

+ −

Horizontal hydraulic pipe bending machine 16T The hydraulic pipe bender offers easy and fast pipe bending with the help of a hydraulic cylinder and pipe fittings of various sizes. It is used in pipe bending for thermal engineering, making car pipe frames, fences, animal stables, trailers, etc....

Compressive force16 tons Stroke245 mm

Vibratory plate 100 kg

0.0

Out of stock

650⁰⁰ ^€

+ −

Why buy a 100 kg vibratory plate? Because the vibrating plate is ideal for consolidating the terrain on small to medium construction sites. Because the treadmill has a powerful and robust 5.5-horsepower four-stroke petrol engine. Because the vibrating plate is distinguished by high-quality...

Vibratory plate weight100 kg Vibration frequency5600 vibracij na minuto

Oil air heater with flue gas exhaust, thermostat and wheels 35 kW [CLONE]

0.0

In stock

650⁰⁰ ^€

+ −

35 kW oil air heater with flue gas exhaust, thermostat and wheels The 35 kW oil air heater with flue gas exhaust is intended for indoor use. It is used to heat non-residential premises such as workshops, warehouses, production halls, barns, greenhouses or during renovation and construction...

Diamond crown drill 2180 W with stand [CLONE] [CLONE]

0.0

In stock

650⁰⁰ ^€

+ −

General description of the 2180 W diamond crown drill with stand With a strong and robust crown drill with a stand, we can drill into vibrated concrete, reinforced concrete (reinforced concrete), rocks, rocks, concrete and brick walls, concrete slabs, screeds, asphalt and concrete coatings,...

Power3950 W Drilling speed0 -750 obratov/min

4” multistage deep well sand resistant pump 250 l/min 100 m 3000 W 400 V

0.0

In stock

670⁰⁰ ^€

+ −

Description of 4” multistage deep well sand resistant pump 250 l/min 100 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...

Power3000 W Immersion depth (max.)100 m

Electric thread cutter 1350 W

0.0

Out of stock

690⁰⁰ ^€

Electric hand thread cutter 1350 W The electric thread cutter achieves a thread cutting speed of 18 rpm, up to 32 rpm. The thread cutting speed depends on the size of the thread cutting head used and the hardness of the metal into which the thread is cut. The electric thread cutter can cut...

Power1350 W

Vibrating plate 106 kg 20 kN

0.0

In stock

700⁰⁰ ^€

+ −

- Reliable and powerful four-stroke 4.1 kW petrol engine - high quality compaction depth up to 35 cm - Centrifugal compaction force of the substrate 20 kN - Simple, stable and robust construction - Compaction area 60 x 50 cm - Weight 106 kg Description of vibrating plate 106 kg...

Vibratory plate weight106 kg Vibration frequency4200 vibracij na minuto

50T HYDRAULIC PULLER

0.0

In stock

720⁰⁰ ^€

+ −

The 50 ton Verke hydraulic puller is an ideal tool for dismounting bearings, gears, hubs, bushings and other components tightly mounted on the shaft. Due to the hydraulic structure, it provides a significant withdrawal force. Unlike threaded pullers, there is no twisting force that can cause the...

Hydraulic recorder 50T

0.0

In stock

720⁰⁰ ^€

+ −

General description of the 50T hydraulic recorder A 50 ton hydraulic recorder is used to disassemble bearings, pulleys, sprockets, etc. A hydraulic cylinder and a hydraulic pump are integrated in the hydraulic recorder. The recorder has three arms, a hydraulic spindle with a power of 50...

Pressure force of the hydraulic spindle50 tons Maximum distance500 mm

Electric heater 30 kW 3ph

0.0

In stock

750⁰⁰ ^€

+ −

Electric heater 30 kW, 400V, square, black The heater is intended for heating workshops, production halls, warehouses, etc. For proper and safe operation of the device, 63 A network protection is required. The device has protection against overheating. It is designed for continuous operation...

Chainsaw 4500 W 400 V

0.0

Out of stock

820⁰⁰ ^€

General description of the 4500 W / 400 V jigsaw The jigsaw is powered by a powerful 4.5 kW, 3-phase, 400 V, 50 Hz electric motor with an axle connected directly to the saw blade (circular blade). The overhanging saw is ideal for sawing branches, logs and other types of wood 270 mm thick and...

Power4500 W Saw blade rotation speed (circular blade)1440 obratov/min