Catalog :: Bestsellers

Flexible foam shield, diam. HARD to DED7767

0.0

On backorder

23⁷⁹ ^€ 19⁰⁴ ^€

+ −

Flexible shield made of polyurethane foam for DED7767 plaster float. A shield for trowelling and smoothing of cement-lime and gypsum plasters. The disc is attached to the trowel with four strong Velcro. Technical data: Diameter: 400 mm Fastening: Velcro

LUT with flux, 1.0mm, 100g, 60% MV, Pb40Sn60

0.0

On backorder

19²⁷ ^€

+ −

Flux solder is the filler metal used in the brazing process. With its use, we can make permanent connections of integrated, electronic and electrical elements. Solder can be used with both transformer and resistance soldering irons. Features: Polish product Technical data:...

Step drill 4-30mm, HSS, TiN

0.0

On backorder

28⁹³ ^€ 19²⁷ ^€

+ −

Stepped metal drill bit with a cylindrical handle Christmas tree. The drill bit is made of high-speed steel HSS (steel 4341), covered with titanium nitride (TiN), which increases the strength and durability of the drill. For processing: steel, non-ferrous metals, plastics. Technical data:...

Charger / AC Adapter 19.5V 3.34A 65W for Sony Vaio SVF14 SVF15 SVF152A29M SVF1521C6EW SVF15AA1QM

0.0

On backorder

19⁴³ ^€

+ −

Warranty: 36 months Power: 65W Voltage: 19.5V Colour: Black Product code: AD91AP Manufacturer: Green Cell Amperage: 3.34A Size: 12,5 x 4,9 x 3,3 cm Weight: 218g Included: 1.2m power cord, user manual, warranty card Plug type: round with pin (6.5-4.4mm) Series: PRO Safety: thermal,...

Inflating gun

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

The A533050 inflation gun is intended for inflating tires and tubes with a valve with compressed air. The gun is equipped with a pressure gauge covered with rubber to protect it from damage. The gun also has a valve to deflate the air. Features: Built-in pressure gauge Rubber covered...

Red flannel shirt, size L, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Red flannel shirt, size M, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Red flannel shirt, size XL, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Red flannel shirt, size XXL, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Blue flannel shirt, size L, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Blue flannel shirt, size M, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Blue flannel shirt, size XL, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Blue flannel shirt, size XXL, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Flannel shirt, navy blue and white, size M, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

Green flannel shirt, size L, 100% cotton

0.0

On backorder

25⁹⁸ ^€ 19⁵¹ ^€

+ −

A flannel shirt is an excellent choice for those who value comfort and convenience when choosing protective clothing. The shirt is made of 100% cotton and a material with a weight of 170g / m2. Buttoned shirt and cuffs. The timeless cut and pattern will make you look good in the shirt not only...

0.6l foam sprayer, adjustable, for high-pressure washer

0.0

On backorder

28⁹³ ^€ 19⁵¹ ^€

+ −

DED882205 foamer, designed for high-pressure washers. With its help, we are able to apply cleaning chemicals without forcing it through the washer pump. The foamer has a dosage adjustment, which allows us to select the appropriate amount of the washing agent sprayed on the surface to be cleaned....

19mm CrV flat wrench ratchet-joint

0.0

On backorder

31¹¹ ^€ 19⁷⁴ ^€

+ −

Combination wrench with a ratchet and a joint made of CrV steel (chrome-vanadium), which ensures adequate strength of the wrenches and resistance to corrosion. The keys are finished with a satin coating that improves the grip of the key while working. The key in the ring part is equipped with a...

Storz stable B coupling 75 mm with female thread

0.0

In stock

20⁰⁰ ^€

+ −

General description Storz stable B couplings 75 mm with female thread The practical and stable C coupling with internal thread is intended for coupling fire-fighting B pipes (75 mm - 3 inches) with pipes that have a normal thread cut in. Storz-threaded pipes are faster, more reliable and...

Connection (Storz and diameter)Storz B 75 mm (3 inch - 3 "- 3 inch) and female thread Sealing2x rubber seal (Dichtung - dihtnga)

Adjustable magnetic holder for laser levels 1/4

0.0

Out of stock

20⁰⁰ ^€

Magnetic holder for laser levellers 1/4 " Adjustable magnetic holder for laser levels is intended for cross lasers, rotary lasers, laser levels, etc. O is equipped with a standard 1/4 " fastening thread . It has a strong magnet that allows it to be securely attached to various...

Multipurpose spirit level with cross laser

0.0

In stock

20⁰⁰ ^€

+ −

Laser spirit level The universal laser spirit level has a multipurpose use. It can be used as a horizontal, vertical or oblique spirit level, contains a point line and cross laser, has a metric / inch ruler and a wound tape measure. It also has built-in LED lighting. The multi-purpose spirit...

Laser power5 mW Laser wavelength630-650 nm

Pyrograph 23 partial 30 W

0.0

In stock

20⁰⁰ ^€

+ −

Ignition device for wood ignition 30 W with many nozzles Pyrograph is intended for making engravings in various materials. The pyrograph allows incision, sealing, ignition, drawing, hot tip cutting, etc. The pyrograph is used to process objects made of wood, leather, wax, styrofoam or cork...

Power30 W

Rezervoar za gorivo za dvotaktno motorno koso 1,2 L

0.0

Out of stock

20⁰⁰ ^€

Rezervoar za gorivo za dvotaktno motorno koso 1,2 L Univerzalna posoda za gorivo za motorne kose. Na ohišje kose je pritrjen z dvema vijakoma. Primeren rezervoar za uvožene in doma narejene kose in kosilnice. Primeren rezervni del za naslednje znamke: JOHN GARDENER GEKO EUROTEC...

Manual pipe bender 6.3 - 10 mm

0.0

In stock

20⁰⁰ ^€

+ −

Manual pipe bender 6.3 - 10 mm The manual pipe bender is designed for bending copper pipes, aluminum pipes and stainless steel pipes. The manual pipe bending machine is ideal for bending small diameter pipes in automotive, heating, air conditioning and ventilation systems, installations, etc....

About seals for air conditioners 270 pieces

0.0

In stock

20⁰⁰ ^€

+ −

Set of O-rings for air conditioners 270 pieces A set of 270 o-rings in eighteen different sizes. O-rings are Ideal for preventing leaks in plumbing, air and gas connections, etc. Features: Consists of acrylic butadiene rubber (HNBR) O rings are resistant to oils, gas, water and...

Automatic fuel tap 60 L / min [CLONE]

0.0

In stock

20⁰⁰ ^€

+ −

General description of the automatic filling tap for refueling 60 L / min The automatic filling gun can be connected to a refueling hose for refueling in the size of 3/4 "(inches - inches - coles). The handle has a built-in internal thread. The filling gun with digital counter can be filled...

Maximum possible flow45 L/min

Pipe cutter for alu, copper and PVC pipes, 3-35mm

0.0

On backorder

21⁹⁶ ^€ 20⁴⁵ ^€

+ −

The pipe cutter is designed for cutting aluminum, copper or PVC pipes. Cutting is done with a cutter wheel without deforming the pipe. The cutter has a folding deburrer to clean the edge of the pipe after cutting. Pipe diameter 3-35 mm. Features: Tube cutter for aluminum, copper and PVC...

SDS PLUS drill bit for concrete 25x600 / 540

0.0

On backorder

31¹¹ ^€ 20⁶⁸ ^€

+ −

Concrete drill bit with SDS PLUS (SDS +) shank Designed for use with all SDS PLUS (SDS +) hammer drills for drilling in concrete, brick and other building materials. Thanks to the use of a widia plate, the material is efficiently cut and discharged outside the hole under the drill undercut. The...

ALUM circular saw. 100z dia. 205x30 mm

0.0

In stock

29⁶⁴ ^€ 21¹⁵ ^€

+ −

Circular saw for cutting non-ferrous materials. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. The teeth have been brought out at a different...

Circular saw for wood, 60 mm, diameter 250 x 30 mm

0.0

In stock

29²⁸ ^€ 21¹⁵ ^€

+ −

Circular saw for cutting all types of wood. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth...

Circular saw for wood 60z dia. 255x30 mm

0.0

On backorder

29⁶⁴ ^€ 21³⁹ ^€

+ −

Circular saw for cutting all types of wood. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth Technical data: Dial Diameter: 255mm Mounting hole...

Step drill 6-38mm, HSS, TiN

0.0

On backorder

31¹¹ ^€ 21³⁹ ^€

+ −

Stepped metal drill bit with a cylindrical handle Christmas tree. The drill bit is made of high-speed steel HSS (steel 4341), covered with titanium nitride (TiN), which increases the strength and durability of the drill. For processing: steel, non-ferrous metals, plastics. Technical data:...

Set 3x Green Cell Cable GC Ray USB-C 120cm Cable with green LED backlight, fast charging Ultra Charge, QC 3.0

0.0

On backorder

21⁴⁶ ^€

+ −

Warranty: 24 months Colour: Black Product code: KABGCSET02 Manufacturer: Green Cell Length: 120 cm Model: GC Ray Backlight: Yes Included: 3x GC Ray 120cm Plug type: USB - USB-C Compatible quick charging technologies: Quick Charge 3.0, Samsung AFC, Huawei FCP

Battery 12V, 1.2Ah Ni-Cd

0.0

On backorder

36⁶⁰ ^€ 21⁴⁸ ^€

+ −

Hand saw for cutting mineral wool 480mm

0.0

On backorder

28⁹³ ^€ 21⁶² ^€

+ −

Hand saw for cutting mineral wool. With its help, we can easily make transverse and longitudinal cuts during insulation works with wool. The long blade can handle any thickness of wool on the market. The specially profiled shape of the tooth will ensure high cutting efficiency while minimizing...

ALUM circular saw. 100z dia.200x30 mm

0.0

On backorder

30⁰¹ ^€ 21⁶² ^€

+ −

Circular saw for cutting non-ferrous materials. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. The teeth have been brought out at a different...

ALUM circular saw. 100z, diameter 210x30 mm

0.0

In stock

30³⁸ ^€ 21⁶² ^€

+ −

Circular saw for cutting non-ferrous materials. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. The teeth have been brought out at a different...

Dust cover

0.0

In stock

25⁶³ ^€ 22⁰⁰ ^€

+ −

The dust cover prevents gypsum dust from escaping beyond the disc contour during grinding. The cover is covered with bristles to prevent accidental scratching of the sanded surface.

Telescopic support 60 - 108 cm [CLONE]

0.0

In stock

22⁰⁰ ^€

+ −

General description of the telescopic frame guard The quick support for frames is ideal for precise adjustment of frames when assembling the door. After the adjustment of the frame, the gap between the base and the wall can be filled with construction foam. The telescopic support bar is easy...

Auxiliary handle for grinding machine # DED7748

0.0

On backorder

30⁷⁵ ^€ 22³³ ^€

+ −

Auxiliary handle for the DED7748 grinder made of durable plastic. Additional handle improving the comfort of work.

80z circular saw for wood, diameter 250x16 mm

0.0

In stock

33³⁰ ^€ 22⁸⁰ ^€

+ −

Circular saw for cutting all types of wood. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth...

Plastic shield for DED7767

0.0

On backorder

30⁰¹ ^€ 23⁰³ ^€

+ −

Plastic disc for DED7767 trowel. Shield made of PVC, used for troweling and smoothing of cement-lime and gypsum plasters. The disc is attached to the trowel with four strong Velcro. Technical data: Diameter: 400 mm Fastening: Velcro

QUATRO SDS PLUS drill bit for concrete 24.0x600 / 540

0.0

On backorder

34⁷⁸ ^€ 23⁰³ ^€

+ −

Quatro drill bit for concrete with SDS PLUS (SDS +) shank. Designed for use with all SDS PLUS (SDS +) rotary hammers for drilling in concrete, brick and other building materials. The drill bit is characterized by a double widia plate, which is deeply embedded and soldered into the drill body....

Socket wrenches 1/4 "" set of 12 pcs

0.0

On backorder

34⁰⁴ ^€ 23⁷⁴ ^€

+ −

A set of socket wrenches consisting of 12 elements. The whole thing is made of chrome vanadium steel, ensuring the appropriate hardness with the key. The set includes a ratchet with 72 teeth, which translates into precision and stroke during work. Features Made of CrV steel Ratchet...

QUATRO SDS PLUS drill bit for concrete 25.0x600 / 540

0.0

On backorder

35⁸⁶ ^€ 23⁷⁴ ^€

+ −

Quatro drill bit for concrete with SDS PLUS (SDS +) shank. Designed for use with all SDS PLUS (SDS +) rotary hammers for drilling in concrete, brick and other building materials. The drill bit is characterized by a double widia plate, which is deeply embedded and soldered into the drill body....

80z circular saw for wood, diameter 250x30 mm

0.0

On backorder

33³⁰ ^€ 23⁹⁷ ^€

+ −

Circular saw for cutting all types of wood. The saw is designed to work with DED7754 and DED7745 saws. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth...

Green Cell Battery C21N1347 for Asus A555 A555L F555 F555L F555LD K555 K555L K555LD R556 R556L R556LD R556LJ X555 X555L

0.0

Out of stock

23⁹⁹ ^€

C21N1347;

Engineer's hammer 2000g, beech shaft

0.0

On backorder

26³⁵ ^€ 24²¹ ^€

+ −

The locksmith hammer is the most popular and universal type of hammer, available in several sizes, which we choose depending on the work to be performed. The locksmith's hammer is intended for construction and renovation works. The head is made of forged, hardened and then painted steel. The...

QUATRO SDS PLUS drill bit for concrete 26.0x600 / 540

0.0

On backorder

36⁶⁰ ^€ 24²¹ ^€

+ −

Quatro drill bit for concrete with SDS PLUS (SDS +) shank. Designed for use with all SDS PLUS (SDS +) rotary hammers for drilling in concrete, brick and other building materials. The drill bit is characterized by a double widia plate, which is deeply embedded and soldered into the drill body....