Catalog :: On sale

Perforated sanding disc, 180 mm, 180 mm, 5 pcs., Al2O3

0.0

On backorder

12⁸¹ ^€ 8⁹³ ^€

+ −

Perforated abrasive disc for gypsum grinder with a diameter of 180 mm and 180 grit. Designed for grinding plaster and gypsum surfaces. Discs made of aluminum oxide, which provides high resistance to abrasion and deformation. High porosity results in more effective removal of gypsum dust during...

Polishing sponge with Velcro (medium) 180mm

0.0

On backorder

10⁹⁸ ^€ 8⁹³ ^€

+ −

Polishing sponge with velcro for DED7955 polisher Technical data of the DED79552 polishing sponge: Diameter: 180 mm Fastening: Velcro

8 "" chain for chainsaw

0.0

On backorder

13⁵⁵ ^€ 8⁹³ ^€

+ −

Replacement chain for chainsaws designed for cutting wood. Chain for 8 "20 cm long guide bars, compatible with most saws on the market. Width of the groove 1.3 mm, pitch 3/8", number of links 33, half-chisel profile. Recommended for DEDRA products Features: Chain for chainsaws by DEDRA...

Shield diam. 300/25.4

0.0

On backorder

12⁴⁵ ^€ 8⁹³ ^€

+ −

The wire butt brush has an M14 thread and is intended for use with angle grinders. It is used for deburring, removing old paint coatings, cleaning, matting materials such as steel, structural steel, wood. Technical data: Diameter: 80mm Mounting Type: M14 Wire type: steel, twisted...

Super Segment 115mm / 22.2

0.0

On backorder

11⁷¹ ^€ 8⁹³ ^€

+ −

H1242 super turbo diamond blade for cutting reinforced concrete, stone, ceramics. Technical data: Dial diameter: 115 mm Mounting hole diameter: 22.2 mm Type of rim: segmented, super turbo

Circular saw for wood 30z diameter 130x20mm

0.0

In stock

10⁹⁸ ^€ 8⁹³ ^€

+ −

Circular saw for cutting all types of wood. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth Technical data: Dial diameter: 130 mm Mounting hole...

Tape measure 20m / 13 mm fiber reinforced fiber

0.0

On backorder

10⁶³ ^€ 8⁹³ ^€

+ −

Tape measure designed for distant measurements. Useful at home, garage or at a construction site. The casing of the tape is made of light but durable material that protects the measure against damage. In addition, the housing is covered with rubber. Tape measure reinforced with glass fiber in...

Measure 5m / 19mm, car - lock, nylon tape, pendant

0.0

On backorder

10⁹⁸ ^€ 8⁹³ ^€

+ −

Metal scraper 102 mm wide

0.0

On backorder

11⁷¹ ^€ 8⁹³ ^€

+ −

Spiral wood drill bit 20x230mm

0.0

On backorder

13⁵⁵ ^€ 8⁹³ ^€

+ −

The twist drill bit is designed for drilling in all types of wood. The drill bit is characterized by a pointed threaded sting, thanks to which we can precisely drill a hole without the need to pre-drill. In addition, a threaded stinger in combination with a special shape of the flute facilitates...

QUATRO SDS PLUS drill bit for concrete 16,0x460 / 400

0.0

On backorder

13⁹⁰ ^€ 8⁹³ ^€

+ −

Quatro drill bit for concrete with SDS PLUS (SDS +) shank. Designed for use with all SDS PLUS (SDS +) rotary hammers for drilling in concrete, brick and other building materials. The drill bit is characterized by a double widia plate, which is deeply embedded and soldered into the drill body....

Flat chisel SDS MAX 25x18x400mm

0.0

On backorder

12⁴⁵ ^€ 8⁹³ ^€

+ −

The WXD2540 flat chisel is an accessory for hammer drills with SDS MAX chuck. It is designed for chipping and chipping concrete, bricks and other building materials. Features: SDS MAX chuck Technical data: Length: 400 mm Chisel width: 25 mm Chisel diameter: 18 mm

10mm 3/8 "" 24UNF drill chuck with key

0.0

On backorder

10²⁵ ^€ 8⁹³ ^€

+ −

Drill chuck with a key with a diameter of 10mm. Holder with a thread diameter of 3 / 8ʺ and 24 threads per inch. Recommended for the DED7957 model Technical data: Chuck diameter: 10mm Chuck type: key, 3/8 "24UNF

Pistolet zraszający prosty reg.dysza mosięż TRIGGER CONTROL

0.0

Out of stock

10⁸⁰ ^€ 8⁹³ ^€

Mixer for paints 10-15 kg dia. 90mm long 400mm

0.0

On backorder

9¹⁵ ^€ 9⁰⁰ ^€

+ −

The DED0310 mixer is designed for mixing all kinds of paints. The mixer can be mounted to devices equipped with a three-jaw chuck, such as screwdrivers or drills. The mixer is made of galvanized steel, which makes it more resistant to corrosion. Features: Polish product Made of...

HEPA filter for # A064300, A064310, A064320

0.0

On backorder

15³⁸ ^€ 9⁰³ ^€

+ −

5m steel tape measure with 19mm snap hook handle

0.0

On backorder

15³⁸ ^€ 9⁰³ ^€

+ −

20mm chisel, CrV steel, bi-material handle

0.0

On backorder

13⁹⁰ ^€ 9¹⁷ ^€

+ −

The wood chisel is made of CrV steel. It is designed to work in both soft and hard wood. It is a chisel with universal use for typical carpentry work. The two-material and contoured handle provides a secure and comfortable grip. The chisel is tipped with a solid mallet. Chisel width 20 mm....

22mm chisel, CrV steel, bi-material handle

0.0

On backorder

13⁹⁰ ^€ 9¹⁷ ^€

+ −

The wood chisel is made of CrV steel. It is designed to work in both soft and hard wood. It is a chisel with universal use for typical carpentry work. The two-material and contoured handle provides a secure and comfortable grip. The chisel is tipped with a solid mallet. Chisel width 22 mm....

U T8 D25.4 H22.5 R12.7mm grooving cutter

0.0

On backorder

13⁵⁵ ^€ 9¹⁷ ^€

+ −

The U-groove wood cutter is made of HSS high-speed steel. Double-disc blade, made of sintered carbide. The cutter is designed for processing solid wood as well as plywood, chipboards, MDF boards. The cutter head is covered with hammer paint, which is resistant to high temperature. Cutter holder...

Nylon cable ties white 4,8x370mm (100pcs)

0.0

On backorder

9⁵¹ ^€ 9¹⁷ ^€

+ −

Headbands made of durable, UV-resistant nylon. The smooth edges of the bands and the inner side prevent any damage to the material fixed with the bands. Features: Made of durable nylon Resistant to UV rays Technical data Width: 4.8 mm Length: 370 mm White color Package...

Nylon cable ties black 4.8x370mm (100 pcs.)

0.0

On backorder

9⁵¹ ^€ 9¹⁷ ^€

+ −

Headbands made of durable, UV-resistant nylon. The smooth edges of the bands and the inner side prevent any damage to the material fixed with the bands. Features: Made of durable nylon Resistant to UV rays Technical data Width: 4.8 mm Length: 370 mm Black colour Package...

Wire stripper

0.0

On backorder

12⁰⁸ ^€ 9¹⁷ ^€

+ −

Pliers are used to strip insulation from electric wires. The jaws are made of CrV steel, which ensures durability and corrosion resistance. The jaws are adjusted with a screw with a lock nut. The handle is made of two-material non-slip material. Length 160 mm. Features: Made of CrV steel...

Nail tongs, black, 205mm

0.0

On backorder

11³⁴ ^€ 9¹⁷ ^€

+ −

The nail pliers are intended for pulling out, bending nails, cutting wire or tying reinforcements. The pincers are made of forged steel and then hardened. The handle is lined with non-slip rubber to improve comfort while working. Length 205 mm. Features: Made of forged and hardened steel...

Steel wool No. 0 200g Made in Germany

0.0

On backorder

13⁵⁵ ^€ 9¹⁷ ^€

+ −

Steel wool enables grinding, polishing and removal of old paint coatings or rust from wooden, metal or glass elements. With its help, we can achieve a high gloss of the cleaned surfaces. Wool is perfect for processing irregular shapes and hard-to-reach places. Wool is abrasion resistant, so it...

Wheels for the tiling bath 15B090, set of 4 pcs

0.0

On backorder

10⁶³ ^€ 9¹⁷ ^€

+ −

A set of four wheels for the tiling bath 15B090. Castors made of durable plastic that will make the bathtub easy to transport.

1/2 "" long hexagonal socket 30 mm with a tag

0.0

On backorder

12⁸¹ ^€ 9¹⁷ ^€

+ −

The cap is made of chrome vanadium steel ensuring its high strength and hardness. Satin surface of the cap. The cap is adapted to work with ratchets, knobs, joints and extensions, with a 1/2 "mounting handle. The inner part of the cap is hexagonal, which ensures good seating of the cap on the...

CrV 1/2 "" extension, 250mm long

0.0

On backorder

11³⁴ ^€ 9¹⁷ ^€

+ −

The extension is made of CrV steel (chrome-vanadium), which ensures adequate strength and corrosion resistance. The extension is finished with a satin coating that improves grip while working. The extension allows you to work in hard-to-reach places. 1/2 "mount. Length 250 mm. Features:...

Crown replaces diameter 73 mm

0.0

On backorder

12⁰⁸ ^€ 9¹⁷ ^€

+ −

The replacement bit with tungsten carbide coating is intended for drilling in brick, aerated concrete, glaze and plastics. For dry, impactless drilling. Technical data: Lace diameter: 73 mm / li> Type of embankment: tungsten For dry running

Drill diam. 8 mm d / gres, terracotta, hexagonal handle.

0.0

On backorder

14⁶⁴ ^€ 9¹⁷ ^€

+ −

Diamond drill bit for tiles, terracotta, glass, white ceramics, stone. Drill bits require cooling when drilling. An additional groove in the drill body facilitates the coolant delivery. A hexagonal handle is used. Technical data: Drill diameter: 8 mm Drill Chuck Type: HEX Type of...

Perforated sanding disc, 180 mm, thickness 60, 5 pcs., Al2O3

0.0

On backorder

12⁸¹ ^€ 9¹⁷ ^€

+ −

Perforated abrasive disc for gypsum grinder with a diameter of 180 mm and 60 grit. Designed for grinding plaster and gypsum surfaces. Discs made of aluminum oxide, which provides high resistance to abrasion and deformation. High porosity results in more effective removal of gypsum dust during...

Perforated sanding disc, 180mm, thickness 40, 5 pcs., Al2O3

0.0

On backorder

12⁸¹ ^€ 9¹⁷ ^€

+ −

Perforated abrasive disc for gypsum grinder with a diameter of 180 mm and 40 grit. Designed for grinding plaster and gypsum surfaces. Discs made of aluminum oxide, which provides high resistance to abrasion and deformation. High porosity results in more effective removal of gypsum dust during...

Shield diam. 230/22.2

0.0

On backorder

11⁷¹ ^€ 9¹⁷ ^€

+ −

The wire butt brush has an M14 thread and is designed to work with angle grinders. It is used for deburring, removing old paint coatings, cleaning, matting materials such as steel, structural steel, wood. Technical data: Diameter: 100mm Mounting Type: M14 Wire type: steel Maximum...

Shield diam. 150/22.2

0.0

On backorder

12⁸¹ ^€ 9¹⁷ ^€

+ −

H1133 diamond blade is used for cutting glaze, terracotta, marble. A continuous rim will provide the user with a perfect surface of the material to be cut. Technical data: Dial diameter: 150 mm Mounting hole diameter: 22.2 mm Wreath type: continuous

Shield diam. 150/25.4

0.0

On backorder

12⁸¹ ^€ 9¹⁷ ^€

+ −

H1133E diamond blade is used for cutting glaze, terracotta, marble. A continuous rim will provide the user with a perfect surface of the material to be cut. Technical data: Dial diameter: 150 mm Mounting hole diameter: 25.4 mm Wreath type: continuous

Circular saw for wood 16z, diameter 160x20 mm

0.0

In stock

11³⁴ ^€ 9¹⁷ ^€

+ −

Circular saw for cutting all types of wood. In order to increase the strength of the teeth and improve the quality and efficiency of cutting, the teeth are coated with sintered carbide. Features: Carbide reinforced teeth Technical data: Dial diameter: 160 mm Mounting hole...

Multi-functional precision knife, 12 blades, 9mm wide

0.0

On backorder

12⁰⁸ ^€ 9¹⁷ ^€

+ −

A multifunctional, precise knife is a knife that will find its application when performing very precise works related to cutting and trimming various types of materials. The knife consists of a very light, handy and comfortable handle made of aluminum, to which we attach one of the 12 blades...

Metal drill bit, HSS, Steel 4341, 135 °, 5x86mm, 10 pcs

0.0

On backorder

12⁰⁸ ^€ 9¹⁷ ^€

+ −

Metal drill 5x86mm DEDRA WMT05086

SDS PLUS drill bit for concrete 18X460 / 400

0.0

On backorder

14²⁸ ^€ 9¹⁷ ^€

+ −

Concrete drill bit with SDS PLUS (SDS +) shank Designed for use with all SDS PLUS (SDS +) hammer drills for drilling in concrete, brick and other building materials. Thanks to the use of a widia plate, the material is efficiently cut and discharged outside the hole under the drill undercut. The...

Welding wire self-shielding 0.8mm, 0.45kg plastic spool E71T-11

0.0

On backorder

15⁷⁴ ^€ 9²³ ^€

+ −

Drywall screw 3.5x25mm, 1000pcs, PH2, phosphated

0.0

On backorder

15⁷⁴ ^€ 9²³ ^€

+ −

2pcs 240mm wood saw blade for reciprocating saw

0.0

On backorder

16⁴⁸ ^€ 9³⁰ ^€

+ −

HCS wood blades are designed for cutting wood and chipboard. Blade tooth pitch 5 TPI. Mounting type - universal, tool-free Technical data: Material: HCS carbon steel Blade length: 240 mm Completion: Wood saw blade: 2 pcs

3 ~ 500V phaser voltage tester

0.0

On backorder

13⁹⁰ ^€ 9⁴⁰ ^€

+ −

Fazer is a universal voltage tester and a non-contact detector which, thanks to optical and acoustic signaling, enables the following tests to be carried out: checking the phase, neutral and earthing, circuit continuity, detection and voltage detection through insulation in wires, checking the...

Set of 5 drills for hammer drills

0.0

On backorder

12⁸¹ ^€ 9⁴⁰ ^€

+ −

Set of 5 concrete drill bits with SDS PLUS (SDS +) shank Designed for use with all hammer drills with SDS PLUS (SDS +) shank for hammer and hammer drilling in concrete materials. The combination of widia and a properly profiled drill spiral ensures that the material is efficiently cut and...

Round, concave cutter T8D35,2H16R11,1

0.0

On backorder

14²⁸ ^€ 9⁴⁰ ^€

+ −

The concave rounding cutter with a bearing is made of HSS high speed steel. Double-disc blade, made of sintered carbide. The cutter is designed for processing solid wood as well as plywood, chipboards, MDF boards. The cutter is equipped with a guide bearing. The cutter head is covered with...

Bi-metal hole saw, diameter 57 mm / 2-1 / 4``

0.0

On backorder

14⁶⁴ ^€ 9⁴⁰ ^€

+ −

The bi-metal hole saw is used to make holes in such materials as: metal, stainless steel, non-ferrous metals, aluminum, wood or plastic. Hole saws are made of high-quality HSS high-speed steel. Appropriate rake angle and tooth spacing ensure effective and quick drilling. When working with a hole...

Back saw 300mm, 12TPI

0.0

On backorder

11³⁴ ^€ 9⁴⁰ ^€

+ −

The back saw is intended for manual cutting of wood, chipboard and plywood. The blade has double-sharpened, hardened teeth, and the handle has been profiled and lined with rubber for improved comfort. Working length 300 mm. Technical data 2 sides sharpened teeth Hardened teeth 12...

Blade saw 450mm, 7 teeth / inch

0.0

On backorder

11³⁴ ^€ 9⁴⁰ ^€

+ −

The saw blade is intended for manual cutting of wood. The blade has two-sided hardened teeth. The handle has been profiled and lined with rubber to improve comfort. Working length 500 mm. Technical data 2 sides sharpened teeth Hardened teeth 7 TPI, 7 teeth per inch Two-material...