Professional hand pump for pressure test 50 bar with tank
Professional hand pump for pressure test 50 bar with tank
With a professional hand pump for a pressure test of 50 bar with a container, various pipelines can be filled with liquid at the required pressure (pressure) up to a pressure of 50 bar (726 psi / 5 MPa). Later, through the built-in pressure gauge or. pressure (manometer) is monitored or the pipeline is tight. The pressure / pressure gauge (manometer) is surrounded by a robust metal protection which prevents damage to the gauge. The pump is mainly used for solar installations, floor heating systems, heating pipe distribution, etc. With a professional hand pump for a pressure test of 50 bar with a tank, we can pump water, aqueous solution with antifreeze additive and oil.
In addition to the hand pump, the set also includes a 135 cm pressure hose, a suction hose, a removable cleaning filter on the suction hose and a 12-liter container from which we pump liquid into the pipeline. The pump can also be used on its own without a container.
The connection diameter of the connecting pressure pipe is Ø 12.7 mm (1/2 inch - 1/2 "- 1/2 inch) with an external thread. By unscrewing and replacing the coupling, you can also install a pressure pipe of a different diameter. You can also easily replace the suction pipe with a longer tube.
The flow rate of the liquid per push of the pump lever (lever stroke) is 45 ml. The length of the extended handle / lever for manual pumping is 50 cm, which greatly facilitates manual pumping. The pressure pump container for the leak test has a built-in handle for the pump handle, which prevents unwanted independent movement of the handle during the transfer of the pump or unwanted interference of the handle during the adjustment of the pump.
Excess liquid or air can be safely and precisely discharged via two screw valves for venting (air outlet) or water outlet in the event of excessive pressure in the filling unit. The screws can be used to completely close the piping system for long-term accurate measurement of the stability of the pressure in the piping.
At the bottom of the tank are four convex feet for a reliable and firm placement of a professional hand pump for pressure test with the tank on the base.
Črpalka visokega pritiska
No reviews found