Refueling tap 60 L / min with digital fuel flow meter

Refueling tap 60 L / min with digital fuel flow meter

Diesel fuel (gas oil - oil), heating oil, petrol and kerosene can be filled with a tap gun with a digital counter.

The maximum possible flow of the fuel filler handle with digital meter is 60 L / min. The pouring speed can be easily adjusted by pressing the handle with one hand. It is also possible to adjust the tapping via a three-stage pin located on the handle. The pin can be set to the desired value with one hand by pressing the handle of the refueling gun, and the filling tap will maintain a steady flow of fuel. Also, the preset automatic tapping power can be interrupted by a simple one-handed grip of the handle.

The fuel tap with a meter has a handle, and most of the housing is ribbed (profiled) and rubberized, which consequently allows a firm grip, as well as comfortable and safer work. It is also easier to clean. Most of the housing of the automatic dispenser handle is made of cast steel, which contains an additional filter inside. The 17 cm tapping tube consists of a high quality and solid, stainless aluminum alloy. On the lower, outer side of the handle, there is an adapted groove for easy placement of the handle on the adapted holder.

The dispensing gun with digital flow meter has an incised internal thread of diameter Ø 25 mm (1 inch - 1 "- 1 inch). The actual external diameter of the internal thread with possible possible wall thicknesses of the connected metal pipe is Ø 33.7 mm. fuel 60 L / min with digital fuel flow meter can be connected additionally added, made of high-quality strong aluminum alloy, built-in connection with rubber seal with external thread for screwing on the tap on one side and ribbed relief for a firmer connection to the pressure or suction pipe with larger, external thread on the connection is Ø 25 mm in diameter (1 inch - 1 "- 1 inch), the actual outer diameter of the larger external thread with included metal thread wall thicknesses is Ø 33.7 mm. The smaller additional connection with external ribbed relief has a diameter of Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch), the actual outer diameter of the smaller connection with ribbed relief with included metal thread wall thicknesses is Ø 26.9 mm.

Fuel tap 60 L / min, has a five-digit high-precision sensitive adjustable digital meter (from 0 to 9999.9) for measuring the single flow of diesel fuel, for measuring the amount of diesel flow in liters with an additional decimal for measuring the flow of diesel fuel in decilitres. The one-time diesel flow meter can be reset. In addition to the main single flow meter, there is also a five-digit high-precision, sensitive and adjustable digital meter (from 0 to 9999.9) for measuring the total flow of diesel fuel in liters, with an additional decimal for measuring the flow of diesel fuel in deciliters. The total diesel flow meter also has the option of resetting the single diesel flow meter. The reset is performed automatically, when the total flow value reaches 9999.9. The accuracy of fuel flow measurement on both meters is ± 1%.

Dedicated, manual calibration of a digital fuel flow meter when refueling different liquids with different compositions is possible on the fuel tap. Kerosene thus has a different composition than diesel fuel, so higher deviations in flow measurement may occur. In such a case, the kerosene is poured into a measuring container with precisely imprinted measuring markings. If the amount of kerosene refilled on the fuel gauge is 100 liters, but in fact 103 liters of kerosene are filled in the tank according to the measuring markings, then the digital fuel flow meter can be calibrated at the touch of a button at the request of a button. the next flow showed a more accurate amount.

On the digital fuel flow meter, you can set different units for measuring the flow through the refueling gun. We can set the flow measurement in Liters, Gallons, Pints and Quarts.