Self-priming electric diesel pump with housing

Write a review
YY-T60A/G01023
28000 
In stock

FREE delivery in Ljubljana and its surroundings! Orders are delivered within two working days

Delivery
Payments
Advantages
  • — Product warranty
  • — Possible return of products
  • — Different payment methods
  • — Wide selection of products

Description of self-priming electric diesel pump with housing

With the self-priming electric diesel fuel pump with housing, diesel fuel (gas oil - oil) and heating oil can be pumped and filled. In contrast, volatile liquids, other highly flammable liquids, medical fluids, water, nitro thinners and PETROL must not be pumped with a self-priming electric diesel pump with a housing.

At the beginning of pumping the liquid, watering the suction pipe is not required. The empty suction hose only needs to be inserted into the intended pumping fluid. When switched on, the self-priming electric diesel pump with housing, by means of a built-in vacuum traction, will automatically fill the suction hose with liquid and start pumping it into the provided tank via the pressure hose. The automatic vacuum filling of the suction pipe greatly speeds up and greatly simplifies the entire pumping process. Potential physical contact with the pumped fluid is thus greatly reduced. The risk of releasing harmful petroleum products into the environment, which can occur during careless and delayed watering of the suction pipe, is also reduced. Because an automatic non-return valve (valve) is installed at the end of the suction pipe, the pumped liquid will not flow out of the suction pipe after the end of pumping. This will allow the next pumping to start faster.

The self-priming diesel pump can be connected to the home electrical network via a 180 cm electrical cable. When operating a self-priming electric gas oil pump with a housing, the pump's electric motor performs 2800 rpm. The motor power of the electric motor oil pump is 1850 W. The electric motor lifts the liquid by 15 meters of height difference. The maximum height of liquid suction is 5 meters of height difference.

The pump diameter of the inlet suction pipe connection is Ø 25 mm (1 inch - 1 "- 1 inch) with internal thread. The actual external diameter of the internal thread including any wall thicknesses of the connected metal pipe is Ø 33.7 mm. The diameter of the outlet pressure pipe connection is Ø 25 mm (1 inch - 1 "- 1 inch) with female thread. The actual outer diameter of the inner thread, including possible wall thicknesses of the connected metal pipe, is Ø 33.7 mm. The maximum fluid flow rate of a self-priming electric fuel pump with housing is 2400 liters per hour, or 40 liters per minute.

Liquids can be pumped into barrels, tanks, automobile fuel tanks, tractor tanks, truck tanks, construction machinery tanks, etc. With the self-priming electric pump for diesel fuel, the process can also be reversed and oil products can be pumped from barrels, tanks, automobile fuel tanks, tractor tanks, tanks for trucks, tanks for construction machinery, etc.

In addition to the self-priming electric diesel pump with frame, the set also includes two rubber seals and two brass connections with an external thread for screwing on a self-priming electric pump for red diesel on one side and a ribbed relief and an additional external threaded connection for a firmer pressure connection. or a suction hose with a clamp, on the other side of the brass connection. The larger, external thread on the connection is Ø 25 mm in diameter (1 inch - 1 "- 1 inch), the actual external diameter of the larger external thread with the included thread wall thicknesses is Ø 33.7 mm. The smaller external additional thread has a connection diameter of Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch), the actual outside diameter of the smaller auxiliary external thread connection with included threaded metal wall thicknesses is Ø 33.7.

The set also includes a collecting basket mesh filter with a brass non-return valve (valve) and a rubber seal for connection to the suction pipe with a nominal internal thread diameter of Ø 25 mm (1 inch - 1 "- 1 inch) and the actual diameter of the internal thread with possible thicknesses included walls of the connected metal pipe Ø 33.7 mm Two additional clamps help to more firmly and more tightly connect the suction pipe to the connection and to the vacuum electric pump for diesel fuel with housing.

The self-priming electric motor oil pump with housing, has a four-digit high-precision analog mechanical meter with large and clearly visible numbers for measuring the flow of diesel fuel in liters, for measuring a single diesel flow. With an additional ten-digit bar scale (scale) at the last number to measure diesel flow, it is possible to measure fuel flow per deciliter (1/10 liter) accurately. The one-time diesel flow meter can be reset. In addition to the main single-flow meter, an eight-digit mechanical meter is also installed to measure the total flow of diesel fuel in liters.

The robust housing of the self-priming electric diesel pump has four legs for reliable and firm mounting of the pump on the ground.o. Several holes (holes) are built into the pump housing for the possibility of attaching a self-priming electric pump for red diesel fuel to a wall or base. The housing also has a built-in handle for safe and convenient storage of the automatic fuel tap. The purpose of the robust housing is to protect the self-priming electric pump for diesel fuel from weathering and shocks, and to catch small liquid oil discharges, in the dedicated handle of the automatic fuel tap. An easily accessible and easily visible red switch, which is located above a clearly visible on / off switch, can ensure that the pump is switched off quickly in the event of an emergency or other emergency.

The 4 meter long robust rubber and polymer pressure hose with brass connections permanently attached on each side ensures easy and reliable measured refueling. The robust rubber and polymer pressure pipe is manufactured in accordance with the European recognized standard (certificate) EN 1360. This European Standard sets out minimum requirements for three types of pipes in two categories and two classes of pipe connections for metered refueling systems, including oxygenated fuels ( up to a maximum of 15% oxygen compounds). The connection is intended for use at ambient temperatures between -30 ° C and +55 ° C at normal temperature at an operating pressure ≤ 16 bar. The maximum fluid pressure (pressure) in a robust rubber polymer pressure pipe can be up to WP 1 MPa (10 bar). The nominal diameter of the rubber and polymer pressure hose for measured refueling is Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch). The nominal diameter of the external thread of the permanently attached brass connection of the rubber and polymer pressure hose for measured fuel filling the first side of the pipe is Ø 25 mm (1 inch - 1 "- 1 inch). The actual outer diameter of the outer thread with the included thicknesses of the metal walls of the thread is Ø 33.7 mm. The nominal diameter of the outer thread of the permanently attached brass connection of the rubber and polymer pressure hose for the measured refueling on the other side of the hose is Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch). metal thread walls is Ø 26.9 mm.

Diesel fuel is pumped by a 210 cm long, flexible and robust, and steel wire-reinforced transparent suction hose. The nominal diameter of the robust flexible suction hose with built-in steel wire is Ø 25 mm (1 inch - 1 "- 1 inch). The actual outside diameter of the robust flexible suction hose with included hose wall thicknesses is Ø 30 mm.

The diesel pump has an automatic filling gun 60 L / min added for easier refueling, which has an incised internal thread of diameter Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch). The real outer diameter of the internal thread with included the possible wall thickness of the connected metal hose is Ø 26.9 mm, so that the added robust rubber and polymer pressure hose can be connected to the automatic fuel tap 60 L / min.

The maximum possible flow of the automatic refueling lever is 60 L / min. The pouring speed can be easily adjusted by pressing the handle with one hand. It is also possible to adjust the tapping via a three-stage pin located on the handle. The pin can be set to the desired value with one hand by pressing the handle of the automatic refueling gun, and the filling tap will maintain a steady flow of fuel. Also, the preset automatic tapping power can be interrupted by a simple one-handed grip of the handle.

The automatic refueling lever has a built-in sensor (probe) that detects fuel when it reaches the sensor in the case of a full fuel tank (tank - tank - thin). At the moment, the shut-off valve is activated in the tap, which prevents further refueling. The automatic pistol thus allows you to pre-set the filling speed via a three-stage pin and let the tap fill the fuel tank itself (tank - tank - tank - cistern), while at the appropriate time it will turn itself off and prevent further refueling (refueling). and consequent fuel leakage.

The automatic fuel tap has a handle, and most of the housing is rubberized and profiled, which in turn allows a firm grip, and comfortable and safer work. It is also easier to clean. Most of the housing of the automatic dispenser handle is made of cast steel, which contains an additional filter inside. The 18 cm filling tube consists of chromed stainless steel, on which a chromed steel winding is wound, which prevents the filling tube from slipping out of the neck of the fuel tank (tank - tank - tank - tank), even in the case of automatic refueling guns we do not physically hold. On the lower, outer side of the handle, there is an adapted groove for easy placement of the handle on the adapted holder.

With a diesel fuel pump, you are completely independent of the movement of diesel prices on the world market. You simply buy fuel in stock when the price is lower and then consume it when cone diesel higher.

Voltage
Electric motor (230 V / 50 Hz single-phase alternating voltage AC)
Power
370 W
Weight
16 kg
Mere paketa
330 x 360 x 400 mm
Warranty
12 mesecev
Fluid flow rate (maximum pumping speed)
3600 litrov/uro
Accuracy of fuel flow measurement on the meter
Deciliter (1/10 liter)
Fluids SUITABLE for pumping and dispensing with a diesel pump
diesel fuel (gas oil - oil) and heating oil
ATTENTION !!! Fluids that are NOT SUITABLE for pumping and filling with a diesel pump
Volatile liquids, other highly flammable liquids, liquids for medical purposes, water, nitro thinners, PETROL
Number of revolutions / revolutions of the electric motor per minute
2800 rpm
Maximum fluid rise (height difference)
15 m
Maximum liquid suction height (height difference)
5 m
Diameter of the intake intake pipe connection on the self-priming electric diesel fuel pump
Nominal diameter Ø 25 mm (1 inch - 1 "- 1 inch) female thread according to DIN 2440: 1978-06; True outer diameter of the inner thread including possible wall thicknesses of the connected metal pipe: Ø 33.7 mm according to DIN 2440: 1978-06
Diameter of the outlet pressure pipe connection on the self-priming electric diesel pump
Nominal diameter Ø 25 mm (1 inch - 1 "- 1 inch female thread according to DIN 2440: 1978-06; True outer diameter of internal thread including possible wall thicknesses of connected metal pipe: Ø 33.7 mm according to DIN 2440: 1978 -06
Pumping
Vacuum drawing of a liquid. The pump does not require initial watering of the suction pipe.
Easily accessible and clearly visible on / off switch of the self-priming electric pump for red oil
Yes
Easily accessible and clearly visible red emergency stop switch for self-priming electric diesel pump
Yes
Holder for automatic tap for refueling at the end of refueling, on the frame of the self-priming electric fuel oil pump
Yes
Length of connected earthed electrical conductor (cable) for connecting the self-priming electric pump for the heater to the mains
180 cm
Two brass connections with external thread for screwing on the self-priming electric pump for red oil on one side and ribbed relief and additional external threaded connection, for a firmer connection to the pressure or suction pipe with a clamp on the ot
Yes
Two diameters of brass connection with external thread for screwing on the self-priming electric pump for red diesel fuel on one side and ribbed relief and additional external threaded connection, for a firmer connection to the pressure or suction pipe wi
Nominal larger diameter Ø 25 mm (1 inch - 1 "- 1 inch), external thread according to DIN 2440: 1978-06; Actual external diameter of larger external thread with included thread wall thicknesses Ø 33.7 mm according to DIN 2440: 1978-06 Nominal minor prem
Two rubber seals for connecting and sealing two brass connections for connecting the suction hose to a self-priming electric fuel pump on one side and a connection to a receiving basket mesh filter with a brass non-return valve (valve) on the other
Yes
Capacitive basket mesh filter with brass non-return valve (valve) and rubber seal for suction hose with internal 32 mm thread for connection to suction hose
Yes
Diameter of the connection of the collecting basket filter with a brass non-return valve (valve)
Nominal diameter Ø 25 mm (1 inch - 1 "- 1 inch) female thread according to DIN 2440: 1978-06; True outer diameter of the inner thread including possible wall thicknesses of the connected metal pipe: Ø 33.7 mm according to DIN 2440: 1978-06
Possibility of screwing any pipe or fitting with nominal Ø 25 mm, inch external thread to self-priming electric diesel pump
Yes - Actual outer diameter of the outer thread including possible wall thicknesses of the connected metal pipe Ø 33.7 mm
Two pipe clamps to the self-priming electric diesel pump with housing
Yes
Robust rubber and polymer pressure hose and permanently attached brass hose connections on each side of the hose, for measured refueling
Yes
European recognized standard (certificate) according to which robust rubber and polymer pressure pipes are made and brass pipe connections are permanently attached on each side of the pipe, for measured refueling
EN 1360 - This European Standard specifies minimum requirements for three types of pipes in two categories and two classes of pipe connections for metered refueling systems, including oxygenated fuels (up to a maximum of 15% oxygen compounds). The connect
Length of robust rubber and polymer pressure hose for measured refueling
4 m
Maximum fluid pressure (pressure) in a robust rubber polymer pressure pipe
WP 1 MPa (10 bar)
Diameter of rubber and polymer pressure pipe for measured refueling
Nominal diameter Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch) according to DIN 2440: 1978-06
Diameter of permanently attached brass connection of rubber and polymer pressure pipe for measured refueling on the first side of the pipe
Nominal diameter Ø 25 mm (1 inch - 1 "- 1 inch), male thread according to DIN 2440: 1978-06; True outer diameter of the external thread including threaded metal wall thicknesses Ø 33.7 mm according to DIN 2440: 1978- 06
Diameter of permanently attached brass connection of rubber and polymer pressure pipe for measured refueling on the other side of the pipe
Nominal diameter 20 mm (3/4 inch - 3/4 "- 3/4 inch), male thread according to DIN 2440: 1978-06; True outer diameter of the outer thread including threaded metal wall thicknesses Ø 26.9 mm according to standard DIN 2440: 1978-06
Robust flexible and transparent suction hose with integrated steel wire
Yes
Length of robust flexible suction hose with built-in steel wire
210 cm
Diameter of a robust flexible suction hose with integrated steel wire
Nominal diameter Ø 25 mm (1 inch - 1 "- 1 inch) Actual outer diameter with included pipe wall thicknesses Ø 30 mm
Automatic fuel tap 60 L / min
Yes
Measurement of single diesel flow
Four-digit high-precision analogue mechanical meter with large and clearly visible numbers for measuring the flow of diesel fuel in liters with an additional ten-digit bar scale (scale) at the last number for measuring the flow of diesel fuel in decilites
Robust housing for protection of the self-priming electric pump for motor oil against weather influences and shocks, and catching of small liquid oil discharges in a dedicated handle of a suspended automatic tap for refueling
Yes
Total diesel flow meter
Eight-digit mechanical meter to measure diesel flow in liters
Multiple holes (holes) in the robust housing for the possibility of attaching a self-priming electric pump for red diesel to a wall or base
Yes
Possibility to reset (reset) the single flow meter
Yes
Internal thread diameter on automatic diesel fuel tap for connection of rubber and polymer pressure pipe for measured fuel filling
Nominal diameter Ø 20 mm (3/4 inch - 3/4 "- 3/4 inch), female thread according to DIN 2440: 1978-06; True outer diameter of the inner thread including possible wall thicknesses of the connected metal pipe: Ø 26, 9 mm according to DIN 2440: 1978-06
Maximum possible flow of automatic tap for refueling diesel fuel
60 L / min
Automatic (automatic) fuel flow shut-off valve on the automatic oil filler tap when the full fuel tank (tank) is reached
Yes
Sensing sensor (probe) which, in contact with fuel, automatically (automatically) interrupts the flow of fuel through the automatic tap and closes the valve (valve)
Yes
Infinitely variable fuel flow control by squeezing the handle on the automatic diesel fuel tap
Yes
Three-stage one-handed fuel flow adjustment on the automatic refueling handle on the automatic diesel fuel tap
Yes
Easy deactivation of preset filling power by squeezing the handle of the automatic gas fuel tap
Yes
Rubberized, profiled handle for more comfortable and safer work, firmer grip, and easy cleaning of the automatic tap for pouring fuel oil
Yes
Rubberized profiled cover of the automatic tap handle for more comfortable and safer work, firm grip and easy cleaning
Yes
18 cm chrome-plated stainless steel tap hose to prevent damage and easy cleaning of the automatic tap for filling red oil
Yes
Winding with pins on the chrome-plated refueling pipe to prevent the tapping from slipping out of the neck of the fuel tank, tank, tank, tank, chrome-plated steel tank
Yes
Adjusted groove on the underside of the handle of the automatic tap for refueling red diesel fuel, for easy storage of the handle on the specially adapted holder
Yes
Weight of automatic refueling tap for refueling
1 kg
Easy to use vacuum electric pump for diesel fuel
Yes
Four legs on the housing of the self-priming electric diesel oil pump for a reliable and solid installation on the ground
Yes
Find similar
4.8
4.8 out of 5
Reviews: 4
5 stars
75%
4 stars
25%
3 stars
0%
2 stars
0%
1 star
0%
Anže K.
5
Comment
Že zarad tlačne cevi je komplet vreden svojega dnarja. Pri Pritu stane meter certificirane tlačne cevi cca. 60 €.
Fabio L.
4
Comment
Če bi bil števec digitalen in nekje na ročki bi bila zadeva idealna. Sicer pa brez pripomb. Avtomatska pipa deuje molto benne in se sama izklopi ko je to potrebno.
Vinko Š.
5
Comment
Edina malenkost je, da je pumpo potrebno preko skikala vklopiti in izklopiti ob začetku in koncu uporabe. Tankstella bi lahko delala na tlak. Se pravi, ko prekineš pretok na pištoli, se pumpa sama ugasne. Ocena delovanja 4,5/5
Franc S.
5
Comment
Robustna in zanesljiva izvedba. Priporočam!
Fast and contactless delivery

We deliver throughout the EU

Return within 14 days

You can return the product within 14 days of purchase