Wall grinder with round and triangular delta grinding head 750 W
General description of a wall grinder with a round and triangular delta grinding head
With a wall sander with a round and triangular delta sanding head, it is possible to smooth and polish walls, ceilings and floors before bleaching up to four times faster than with manual sanding. After sanding, the wall, ceiling or floor will be completely smoothed, which will not leave scratches, holes, scratches, lumps and other unevenness or irregularities later after bleaching. The walls, ceilings and floors will be perfectly flat. It is also possible to remove old coatings of wall paint with a wall sander.
The wall grinder is powered by a powerful 750 W electric motor. The wall grinder can be connected to the suction device via the built-in suction hose system and the 3.7 m long flexible suction hose included in the kit. With direct suction, you will no longer inhale unpleasant dust, which is dangerous for your respiratory system, and at the same time you will have a clean working environment and a clear view of the treated surface.
The round and triangular delta grinding head of the wall sander is sucked onto the treated surface via purpose-built holes in the sanding head and sandpaper with the help of a built-in vacuum cleaner, thus facilitating the handling of the wall sander. Embedded holes in the sanding head and sandpaper also improve the efficiency of dust extraction.
With a large handle, the wall grinder is extremely easy to operate. Due to its light weight, you will smooth 10 rooms and more without much effort. You will not need any ladders or scaffolding when smoothing the walls, as you will reach all corners of the ceiling with the 1800 mm long wall sander.
The wall sander can be stretched and shrunk as desired during work. For easier transport, it can be shrunk and folded to a length of 1350 mm, and for smoothing high ceilings, it can be stretched up to 1800 mm. When the wall sander is stretched or shrunk, any extended position can be maintained with a lock.
For better balance and greater control at work, the wall sander has a large additional movable handle.
The flexible sanding head of the wall sander allows better smoothing of all walls from floor to ceiling without the need to change position.
The wall sander has a sanding paper mounted with the help of a self-adhesive hedgehog, which effectively prevents the sanding paper from falling out of the sanding head during smoothing.
You can adjust the smoothing speed of the surfaces with the 5-step wheel (1 to 5) on the handle of the wall sander.
In addition to the wall sander, the set also includes two different connections for connecting the suction hose to the suction device or suction bag, six round sanding papers with a diameter of Ø 225 mm and different grains (80, 100, 120, 150, 180, 240), six triangular delta sandpaper of various grain diameters (80, 100, 120, 150, 180, 240), a round sanding head, a triangular delta sanding head, a tool for assembling and maintaining a wall sander, and a convenient case for storing a wall sander with a vacuum cleaner and associated accessories.
The wall grinder has a built-in grinding head (grinding disc), Ø 225 mm in diameter, which rotates at a speed of 1000 to 2100 rpm. With the help of a tool-free quick-clamping system, the round grinding head can be replaced with a triangular, delta-shaped grinding head, which makes it easier to grind gypsum boards in corners and niches.
The wall sander is connected to the mains via an electric cable