Water pumps

Price
O seals resistant to diesel and acid 225 pieces Set of 225 professional o-rings in eighteen different sizes. O-rings are made of acrylic butadiene rubber (HNBR). O-rings are resistant to oils, gas, water and alcoholic solvents. The contents of the set are arranged by size in a convenient...
0.0
In stock
3000 
+
Tlačno stikalo The pressure switch 1.6 - 4.6 bar is designed for pumping water. The pressure switch is also suitable for drinking water.  Properties  Pressure 1.6 - 4.6 bar Max Intensity 12 A Electrical voltage 230/400 V Diameter 1/4 Cola Thread type GW / GZ
Tlačno stikalo The pressure switch 1.6 - 4.6 bar is designed for pumping water. The pressure switch is also suitable for drinking water.  Properties  Pressure 1.6 - 4.6 bar Max Intensity 12 A Electrical voltage 230/400 V Diameter 1/4 Cola Thread type GW / GZ
Tlačno stikalo Tlačno stikalo 1,6 - 6 bar je zasnovano za črpalke za vodo. Lastnosti Tlak 1 - 6 bar  Maks. Intenzivnost 16 A  Električna napetost 230 / 400 V  Premer 1/4 Cole  Vrsta navoja GW / GZ
Tlačno stikalo z manometrom 1,6 - 4,6 bar 230 / 400 V 12 A Lastnosti: Območje tlaka: 1,6 - 4,6 Največji tok: 12 A Napetost: 230 V / 400 V Premer priključka: 1 " Vrsta navoja: GZ (zunanji navoj) Tlačno stikalo je sestavljeno iz: Manometra Petstopenjske izpusta Tlačno stikalo Stikala so...
0.0
In stock
5000 
+
The DED8851 submersible diaphragm pump is a device used for pumping clean water from a well, swimming pool or other tank. It is perfect for a household, agricultural or garden. The device is easy to use and efficient - it works in a two-hour system, i.e. after two hours of pumping, it should be...
Electronic hot water pump 25-80 / 180. The circulating pump is designed for hot water heating systems of all types. The circulation pump is useful in circulation systems for cold and hot water and for air conditioners. The circulation pump is suitable for installation in central heating systems.
Tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma 1,5 - 3 Bar Tlačno stikalo lahko priključite na črpalke preko dveh dodanih električnih priključnih vodnikov (kablov) z vtičnico in vtikačem. Lastnosti: Območje tlaka: 1,5 - 3 Bar Največji tok: 16 A ...
Elektronsko tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma 1,5 - 3 Bar 230 V 12 A S preprosto namestitvijo elektronsko tlačno stikalo omogoča avtomatizacijo katere koli vrste tlačne črpalke z več kot 1,5 bara pritiska. Tlačno stikalo hkrati ščiti črpalke pred...
Elektronsko tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma 10 Bar 230 V 10 A Tehnične lastnosti: - Krmiljenje črpalke - Hitra sprostitev  - Samodejen vklop in izklop črpalke ob odprtju / zaprtju pipe - Vgrajen protipovratni ventil in vgrajena zaščita pred...
-Three levels of optional speed level for load setting -Silent operation -Maximum pressure up to 10 bar -Medium temperature from + 2 ° C to + 110 ° C DESCRIPTION OF HEAT CIRCULATION PUMP 25-60-180 The electronic hot water pump 25-60-180 is intended for circular pumping of liquids in...
0.0
In stock
6500 
+
-Three levels of optional speed level for load setting -Silent operation -Maximum pressure up to 10 bar -Medium temperature from + 2 ° C to + 110 ° C DESCRIPTION OF HEAT CIRCULATION PUMP 25-60-180 The electronic hot water pump 25-60-180 is intended for circular pumping of liquids in...
0.0
On backorder
6500 
+
The DED8851 submersible diaphragm pump is a device used for pumping clean water from a well, swimming pool or other tank. It is perfect for a household, agricultural or garden. The device is easy to use and efficient - it works in a two-hour system, i.e. after two hours of pumping, it should be...
Pretočno tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma Tlačno stikalo je elektronska naprava, ki se uporablja za krmiljenje črpalke. Deluje tako, da spremlja spremembe nivoja tlaka v cevovodu in pretok vode skozi cevovod. Z nastavitvami vklopa in izklopa tlaka,...
-Three levels of optional speed level for load setting -Silent operation -Maximum pressure up to 10 bar -Medium temperature from + 2 ° C to + 110 ° C DESCRIPTION OF HEAT CIRCULATION PUMP 25-60-180 The electronic hot water pump 25-60-180 is intended for circular pumping of liquids in...
0.0
Out of stock
7000 
Electronic hot water pump 25-80 / 180. The circulating pump is designed for hot water heating systems of all types. The circulation pump is useful in circulation systems for cold and hot water and for air conditioners. The circulation pump is suitable for installation in central heating systems.
0.0
In stock
7000 
+
General description of the 1100 W submersible pump With the submersible pump, you can easily and conveniently pump water for household, garden and agriculture. It is also suitable for dirty water from garden ponds, basements or construction pits. The pump has 400 W, which means that it pumps...
Power400 W Flow7500 l / h
Pretočno tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma Tlačno stikalo je elektronska naprava, ki se uporablja za krmiljenje črpalke. Deluje tako, da spremlja spremembe nivoja tlaka v cevovodu in pretok vode skozi cevovod. Z nastavitvami vklopa in izklopa tlaka,...
0.0
In stock
8000 
+
General description of the 350 W submersible pump. With the submersible pump, you can easily and conveniently pump water for garden watering, showering, household, garden and agriculture. It is also suitable for dirty water from garden ponds, basements or construction pits. The pump has 350 W,...
Power350 W Flow2400 l / h
Filling and test pressureUntil 25 bar Fluid flow per pump lever stroke (lever stroke)13 ml
About seals HNBR, SAE, metric 900 pieces HNBR O-rings consist of compounds made from hydrogenated nitrile rubber. The working range of O-rings is from -30 to +150 ° C. O-rings are characterized by high mechanical strength and increased wear resistance. Resistance of HNBR O rings to: -...
Tlačno stikalo 1,5 - 3 Bar 230 V 16 A Tlačno stikalo je zanesljiv in vzdržljiv krmilnik za potopne, hidroforne in površinske črpalke. Tlačno stikalo se lahko uporablja s čraplkami, ki črpajo samo čisto vodo, brez mehanskih nečistoč. Tlačno stikalo ni združljivo s hidrofornimi rezervoarji in...
Tlačno krmilno stikalo z 1 1/4 Colskim navojem in protipovratnim ventilom za vrtne in globinske cevne črpalke do moči 2,2 kW 30 A in do 10 Bar Tlačno ltmilno stikalo omogoča avtomatizacijo katere koli vrste tlačne črpalke do 10 barov pritiska. Tlačno stikalo hkrati ščiti črpalko pred...
Elektronsko tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma 10 Bar 230 V 10 A Tehnične lastnosti: - Krmiljenje črpalke - Hitra sprostitev  - Samodejen vklop in izklop črpalke ob odprtju / zaprtju pipe - Vgrajen protipovratni ventil in vgrajena zaščita pred...
Robustno tlačno stikalo 11 bar H - V Zadolžitev robustnega tlačnega stikala je nadzor nad delovanjem motorjev (črpalk in kompresorjev), v odvisnosti od prednastavljenega območja tlaka. Parametri tlačnega stikala: Razpon preklopnih tlakov: od 1,5 do 8,8 bara Območje prekinitvenega tlaka:...
0.0
In stock
10000 
+
General description of the 1000 W flow garden pump We can water and irrigate gardens and lawns with a submersible pump. It easily and conveniently pumps and pumps water from garden ponds, cisterns, swimming pools, etc. The pump has 1000 W, which means that it pumps 3500 liters of water from an...
Power1000 W Suction depth8 m
0.0
Out of stock
10000 
General description of the 1100 W submersible pump With the submersible pump, you can easily and conveniently pump water for household, garden and agriculture. It is also suitable for dirty water from garden ponds, basements or construction pits. The pump has 1100 W, which means that it pumps...
Power1100 W Flow14500 l / h
0.0
Out of stock
10000 
General description of the 800 W stainless steel garden flow pump We can water and irrigate gardens and lawns with a submersible pump. It easily and conveniently pumps and pumps water from garden ponds, cisterns, swimming pools, etc. The pump has 800 W, which means that in one hour it pumps...
Power800 W Suction depth8 m
Pretočno tlačno stikalo za črpalke z manometrom in električnima priključnima kabloma Tlačno stikalo je elektronska naprava, ki se uporablja za krmiljenje črpalke. Deluje tako, da spremlja spremembe nivoja tlaka v cevovodu in pretok vode skozi cevovod. Z nastavitvami vklopa in izklopa tlaka,...
Description of a hand pump for pressure test 40 bar with 10 L tank With a manual pump for a pressure test of 40 bar, a container can be used to fill various pipelines with liquid at the required pressure (pressure). Later, through the built-in pressure gauge or. pressure (manometer) is...
Filling and test pressureUp to 40 bar Fluid flow per pump lever stroke (lever stroke)13 ml
Professional hand pump for pressure test 50 bar with tank With a professional hand pump for a pressure test of 50 bar with a container, various pipelines can be filled with liquid at the required pressure (pressure) up to a pressure of 50 bar (726 psi / 5 MPa). Later, through the built-in...
Filling and test pressureUntil 25 bar Fluid flow per pump lever stroke (lever stroke)45 ml
Professional hand pump for pressure test 50 bar with tank With a professional hand pump for a pressure test of 50 bar with a container, various pipelines can be filled with liquid at the required pressure (pressure) up to a pressure of 50 bar (726 psi / 5 MPa). Later, through the built-in...
Filling and test pressureUp to 50 bar Fluid flow per pump lever stroke (lever stroke)45 ml
Verke's QGD series electric pumps are high-quality pumps, designed for pumping clean water in wells with a minimum diameter of 110 mm. QGD pumps are screw pumps. The pumps can be used in households for water supply, farms for irrigation. They can pump clean and cold water containing no more than...
Power370 W Immersion depth (max.)50 m
Description of 3” submersible monoblock pump 17 l/min 77 m 250 W 230 V 75mm deep well displacement pumps 3”SCR. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with power cables...
Power250 W Immersion depth (max.)77 m
Deep well monoblock pump 25 l/min 60 m 550 W 100 mm 230 V The submersible screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and...
Power550 W Immersion depth (max.)60 m
Deep well monoblock pump 30 l/min 50 m 550 W 100 mm 230 V Deep well monoblock electric pumps are high-quality pumps designed for pumping clean water in wells with a minimum diameter of 110 mm. This pump is screw pump. The pump can be used in households for water supply, farms for...
Power550 W Immersion depth (max.)50 m
0.0
Out of stock
18000 
Filling and test pressureUp to 65 bar Volume of liquid container12.5 litrov
Description of 3” submersible monoblock pump 30 l/min 65 m 370 W 230 V 75mm deep well displacement pump SQIBO. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with power cables...
Power370 W Immersion depth (max.)60 m
Deep well monoblock pump 28 l/min 70 m 1100 W 100 mm 230 V The submersible screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and...
Power1100 W Immersion depth (max.)70 m
Deep well monoblock pump 30 l/min 60 m 750 W 100 mm 230 V The submersible screw pump is ideal for use in single and multi-family houses, recreational plots, farms, production plants, perfect for irrigation. Designed for pumping water from drilled deep water intakes, ring wells and...
Power750 W Immersion depth (max.)60 m
Deep well monoblock pump 30 l/min 50 m 550 W 100 mm 230 V Deep well monoblock electric pumps are high-quality pumps designed for pumping clean water in wells with a minimum diameter of 110 mm. This pump is screw pump. The pump can be used in households for water supply, farms for...
Power750 W Immersion depth (max.)100 m
0.0
In stock
20000  23000  -13%
+
Filling and test pressure240 bar Volume of liquid container24 litrov
Submersible deep well monoblock pump 40 l/min 75 m 550 W 100 mm 230 V 100 mm deep well displacement pumps. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with 20 m power cables. Due to the...
Power550 W Immersion depth (max.)75 m
- Minimum bore diameter for inserting a submersible pump 100 mm - Connection pressure pipe connection diameter 25 mm (1 inch) - Diameter of the submersible pump 95 mm - pumping speed 65 liters per minute - High quality - Power 400 W Description of deep well monoblock...
Power400 W Immersion depth (max.)26 m
3” submersible deep well monoblock pump 30 l/min 80 m 550 W 230 V 75mm deep well displacement pumps. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with 20 m power cables. Due to the...
Power550 W Immersion depth (max.)80 m
Description of 3” submersible monoblock pump 35 l/min 70 m 550 W 230 V 75mm deep well displacement pump SQIBO. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with power cables...
Power550 W Immersion depth (max.)70 m
Submersible deep well monoblock pump 45 l/min 90 m 750 W 100 mm 230 V 100 mm deep well displacement pumps. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with 20 m power cables. Due to the...
Power750 W Immersion depth (max.)90 m
Description of 3” submersible monoblock pump 40 l/min 115 m 750 W 230 V 75mm deep well displacement pump SQIBO. The pump is mainly made of stainless steel, e.g. housing, bolts, inlet/outlet and rotor. Depending on the customer’s requirements, the pump is equipped with power cables...
Power750 W Immersion depth (max.)115 m
- Minimum bore diameter for inserting a submersible pump 100 mm - Connection pressure pipe connection diameter 25 mm (1 inches) - Diameter of the submersible pump 95 mm - pumping speed 60 liters per minute (3600 l / h) - High quality - Power 600 W Description of...
Power600 W Immersion depth (max.)42 m
- Minimum bore diameter for inserting a submersible pump 100 mm - Connection pressure pipe connection diameter 25 mm (1 inch) - Diameter of the submersible pump 100 mm - pumping speed 55 liters per minute (3300 l / h) - High quality - Power 750 W Description of pipe submersible...
Power750 W Immersion depth (max.)100 m
Description of 2” submersible monoblock pump 18 l/min 50 m 370 W 230 V 2"STING is the first and at the moment the only 2” deep well displacement pump. The diameter of the pump does not exceed 53 mm and the hydraulic section consists of the stator, rotor and clutch. The pump is...
Power370 W Immersion depth (max.)50 m
Description of 3” multi-stage deep well sand resistant pump 50 l/min 60 m 370 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...
Power370 W Immersion depth (max.)60 m
Deep well pump 50 l/min 60 m 750 W 96 mm 230 V Pumps designed for boreholes of at least 4 inches. The pump is equipped with a 15-meter power cable and a "CONTROL BOX" in which the main switch is located. The pump winding is wound with 100% copper wire, which extends the life of the pump...
Power750 W Immersion depth (max.)60 m
- Connection pressure pipe connection diameter 25 mm (1 inch) - Diameter of the submersible pump 75 mm - pumping speed 45 liters per minute (2700 l / h) - High quality - Power 900 W Description of deep well pump 45 l/min 45 m 900 W 75 mm 230 V With a submersible pipe...
Power900 W Immersion depth (max.)45 m
Multi-stage deep well pump 70 l/min 63 m 750 W 98 mm 230 V An efficient submersible pump   will allow you to efficiently pump water to the surface. The engine is able to reach a speed of 2850 rpm , which guarantees a flow of 70 liters per minute. The maximum head of the water column...
Power750 W Immersion depth (max.)63 m
Description of 4” submersible monoblock pump 45 l/min 60 m 750 W 4” (98 mm diameter) multi-stage deep well peripheral pump. Due to the small diameter, the pump can be installed in well with 25 cm diameter pipes. Depending on the customer requirements, the pump can be equipped with standard...
Power750 W Immersion depth (max.)60 m
- Minimum bore diameter for inserting a submersible pump 100 mm - Connection pressure pipe connection diameter 25 mm (1 inches) - Diameter of the submersible pump 95 mm - pumping speed 90 liters per minute (5400 l / h) - High quality - Power 1100 W Description of...
Power1100 W Immersion depth (max.)62 m
FREE delivery in Ljubljana and its surroundings! Orders are delivered within two working days
Power1100 W Immersion depth (max.)55 m
Deep well pump 50 l/min 60 m 750 W 96 mm 230 V Pumps designed for boreholes of at least 4 inches. The pump is equipped with a 15-meter power cable and a "CONTROL BOX" in which the main switch is located. The pump winding is wound with 100% copper wire, which extends the life of the pump...
Power750 W Immersion depth (max.)60 m
Description of 2,5” multi-stage deep well sand resistant pump 45 l/min 66 m 370 W 230 V 2.5” (66 mm diameter) multi-stage deep well pumps with increased resistance to sand. The pump capacitor is built into the motor. The pumps are available with 20 m long stock cable terminated with a plug....
Power370 W Immersion depth (max.)66 m
0.0
In stock
27500 
+
Power4875 W
Description of 3” submersible monoblock pump 45 l/min 60 m 750 W 3” (75 mm diameter) multi-stage deep well peripheral pump. Due to the small diameter, the pump can be installed in well with 25 cm diameter pipes. Depending on the customer requirements, the pump can be equipped with standard...
Power750 W Immersion depth (max.)60 m
Deep well pump 50 l/min 60 m 750 W 96 mm 230 V Pumps designed for boreholes of at least 4 inches. The pump is equipped with a 15-meter power cable and a "CONTROL BOX" in which the main switch is located. The pump winding is wound with 100% copper wire, which extends the life of the pump...
Power1100 W Immersion depth (max.)72 m
General description of multi-stage deep well pump 67 l/min 34 m 370 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power370 W Immersion depth (max.)34 m
Multi-stage deep well pump 70 l/min 84 m 900 W 98 mm 230 V An efficient submersible pump   will allow you to efficiently pump water to the surface. The engine is able to reach a speed of 2850 rpm , which guarantees a flow of 70 liters per minute. The maximum head of the water column...
Power900 W Immersion depth (max.)84 m
Power550 W Immersion depth (max.)82 m
Deep well pump 50 l/min 90 m 1100 W 96 mm 230 V Pumps designed for boreholes of at least 4 inches. The two-stage pump is equipped with a 20-meter power cable and a "CONTROL BOX" with the main switch. The pump winding is wound with 100% copper wire, which extends the life of the pump and...
Power1100 W Immersion depth (max.)90 m
0.0
In stock
30000  35000  -14%
+
Tlačno stikalo 1,5 - 3 Bar 230 V 16 A Tlačno stikalo je zanesljiv in vzdržljiv krmilnik za potopne, hidroforne in površinske črpalke. Tlačno stikalo se lahko uporablja s čraplkami, ki črpajo samo čisto vodo, brez mehanskih nečistoč. Tlačno stikalo ni združljivo s hidrofornimi rezervoarji in...
Description of 2,5” multi-stage deep well sand resistant pump 45 l/min 85 m 550 W 230 V 2.5” (66 mm diameter) multi-stage deep well pumps with increased resistance to sand. The pump capacitor is built into the motor. The pumps are available with 20 m long stock cable terminated with a plug....
Power550 W Immersion depth (max.)85 m
General description of multi-stage deep well pump 67 l/min 67 m 750 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power750 W Immersion depth (max.)67 m
Description of 4” submersible monoblock pump 50 l/min 107 m 1100 W 4" (98 mm diameter) deep well peripheral pumps. Pump are designed for at least 4-inch wells. Durable materials such as stainless steel and brass have been used in the construction of impeller pumps. Application...
Power1100 W Immersion depth (max.)107 m
Description of 4” multistage deep well sand resistant pump 80 l/min 85 m 750 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased resistance...
Power750 W Immersion depth (max.)85 m
- Minimum bore diameter for inserting a submersible pump 100 mm - Connection pressure pipe connection diameter 25 mm (1 inches) - Diameter of the submersible pump 95 mm - pumping speed of 90 liters per minute - High quality - Power 1500 W Description of multi-stage...
Power1500 W Immersion depth (max.)62 m
Description of 3” multi-stage deep well sand resistant pump 50 l/min 110 m 750 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...
Power750 W Immersion depth (max.)110 m
General description of multi-stage deep well pump 150 l/min 46 m 1100 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power1100 W Immersion depth (max.)46 m
Description of 3” multi-stage deep well sand resistant pump 70 l/min 80 m 750 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps, with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...
Power750 W Immersion depth (max.)80 m
Description of 3” multi-stage deep well sand resistant pump 100 l/min 62 m 750 W 230 V 75 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the selection of...
Power750 W Immersion depth (max.)62 m
Description of 4” submersible monoblock pump 50 l/min 120 m 1500 W 4" (98 mm diameter) deep well peripheral pumps. Pump are designed for at least 4-inch wells. Durable materials such as stainless steel and brass have been used in the construction of impeller pumps. Application...
Power1500 W Immersion depth (max.)120 m
Description of 3” multi-stage deep well sand resistant pump 70 l/min 117 m 1100 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps, with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...
Power1100 W Immersion depth (max.)117 m
Description of 4” multistage deep well sand resistant pump 94 l/min 103 m 1100 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1100 W Immersion depth (max.)103 m
Description of 3” multi-stage deep well sand resistant pump 100 l/min 77 m 1100 W 230 V 75 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the selection of...
Power1100 W Immersion depth (max.)77 m
Description of 3” multi-stage deep well sand resistant pump 50 l/min 152 m 1100 W 230 V 3 inch (74 mm diameter) multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the...
Power1100 W Immersion depth (max.)152 m
General description of multi-stage deep well pump 67 l/min 94 m 1100 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power1100 W Immersion depth (max.)94 m
0.0
In stock
39000  45000  -13%
+
- For testing and filling underfloor heating pipes, radiator heating pipes, solar system .... - Filling and test pressure 60 bar - Pumping water and aqueous solution with antifreeze additive - Container with lid for filling liquid - Flow rate of liquid 2.7 liters per minute - Two...
Filling and test pressureUp to 60 bar Flow2.7 L / min
Description of 4” multistage deep well sand resistant pump 120 l/min 102 m 1100 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1100 W Immersion depth (max.)102 m
Description of 3” multi-stage deep well sand resistant pump 100 l/min 93 m 1100 W 230 V 75 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the selection of...
Power1100 W Immersion depth (max.)93 m
Description of 4” multistage deep well sand resistant pump 94 l/min 135 m 1500 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1500 W Immersion depth (max.)135 m
Description of 4” multistage deep well sand resistant pump 162 l/min 74 m 1500 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1500 W Immersion depth (max.)74 m
Description of 4” multistage deep well sand resistant pump 120 l/min 131 m 1500 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1500 W Immersion depth (max.)131 m
General description of multi-stage deep well pump 150 l/min 72 m 2200 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power2200 W Immersion depth (max.)72 m
Description of 3” multi-stage deep well sand resistant pump 100 l/min 108 m 1500 W 230 V 75 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for 3 and 4 inch wells. Increased resistance to sand is achieved by using "floating impellers" and the selection of...
Power1500 W Immersion depth (max.)108 m
- For testing and filling underfloor heating pipes, radiator heating pipes, solar system .... - Filling and test pressure 100 bar - Pumping water and aqueous solution with antifreeze additive - Container with lid for filling liquid - Fluid flow rate 2.9 liters per minute - Two screw...
Filling and test pressureDo 100 bar Flow2.7 L / min
Description of 4” multistage deep well sand resistant pump 200 l/min 76 m 1500 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power1500 W Immersion depth (max.)76 m
General description of multi-stage deep well pump 67 l/min 168 m 2200 W 102 mm 230 V With a deep well pump we pump water from deep wells. The submersible deep well pump can be submerged to a depth of 20m and successfully pumped water. The pump is intended for pumping groundwater. It can also...
Power2200 W Immersion depth (max.)168 m
Description of 4” multistage deep well sand resistant pump 162 l/min 103 m 2200 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power2200 W Immersion depth (max.)103 m
Description of 4” multistage deep well sand resistant pump 200 l/min 107 m 2200 W 230 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power2250 W Immersion depth (max.)107 m
Description of 4” multistage deep well sand resistant pump 300 l/min 98 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power3000 W Immersion depth (max.)98 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 85 l/min 85 m 800 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced energy-saving...
Power800 W Immersion depth (max.)85 m
Description of 4” multistage deep well sand resistant pump 200 l/min 145 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power3000 W Immersion depth (max.)145 m
Description of 4” multistage deep well sand resistant pump 250 l/min 100 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power3000 W Immersion depth (max.)100 m
Description of 4” multistage deep well sand resistant pump 360 l/min 72 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power3000 W Immersion depth (max.)72 m
Description of 4” multistage deep well sand resistant pump 162 l/min 148 m 3000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power3000 W Immersion depth (max.)148 m
Description of 4” multistage deep well sand resistant pump 250 l/min 135 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)135 m
Description of 4” multistage deep well sand resistant pump 300 l/min 123 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)123 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 85 l/min 110 m 1100 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power1100 W Immersion depth (max.)110 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 150 l/min 75 m 1100 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power1100 W Immersion depth (max.)75 m
Description of 4” multistage deep well sand resistant pump 360 l/min 94 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)94 m
Description of 4” multistage deep well sand resistant pump 250 l/min 169 m 5500 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power5500 W Immersion depth (max.)169 m
Description of 4” multistage deep well sand resistant pump 415 l/min 95 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)95 m
Description of 4” multistage deep well sand resistant pump 300 l/min 159 m 5500 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power5500 W Immersion depth (max.)159 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 85 l/min 150 m 1500 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power1500 W Immersion depth (max.)150 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 150 l/min 102 m 1500 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power1500 W Immersion depth (max.)102 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 250 l/min 56 m 1500 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power1500 W Immersion depth (max.)56 m
Description of 4” multistage deep well sand resistant pump 500 l/min 90 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)90 m
Description of 4” multistage deep well sand resistant pump 360 l/min 121 m 5500 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power5500 W Immersion depth (max.)121 m
Description of 5” multistage deep well sand resistant pump 500 l/min 99 m 4000 W 400 V 127 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 5” wells. The SD series were the first pumps on the market to be known as "sand resistant”. The "sand...
Power4000 W Immersion depth (max.)99 m
Description of 4” multistage deep well sand resistant pump 435 l/min 75 m 4000 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power4000 W Immersion depth (max.)75 m
Description of 4” multistage deep well sand resistant pump 500 l/min 125 m 5500 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power5500 W Immersion depth (max.)125 m
Description of 5” multistage deep well sand resistant pump 500 l/min 115 m 5500 W 400 V 127 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 5” wells. The SD series were the first pumps on the market to be known as "sand resistant”. The "sand...
Power5500 W Immersion depth (max.)115 m
Description of 4” multistage deep well sand resistant pump 415 l/min 118 m 5500 W 400 V 98 mm diameter multi-stage deep well pumps with increased resistance to sand, intended for minimum 4 inch diameter wells. All SD pumps have PZH (National Institute of Hygiene) approval. Increased...
Power5500 W Immersion depth (max.)118 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 85 l/min 220 m 2200 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power2200 W Immersion depth (max.)220 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 150 l/min 130 m 2200 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power2200 W Immersion depth (max.)130 m
Description of 3” multi-stage high speed deep well pump 6000 rpm 250 l/min 80 m 2200 W 160 - 250 V Multi-stage centrifugal deep well pumps are designed for operation in drilled wells and open water reservoirs. Unlike other deep well pumps, the high speed well pumps have advanced...
Power2200 W Immersion depth (max.)80 m
Show another 27 products